Black & Decker CTO6305C manual Slide Rack Positions, When in USE, Always USE Oven, ANY or Inner

How to Use

This product is for household use only.

$CAUTION"65*0/

THIS OVENTHIS OVENTSGGETSHOHOT. WHEN.

•If using convection bake, remember to lower the suggested temperature of a recipe or package by 25˚F.

Caution: Unit gets hot. NEVER touch outer surfaces, including the glass door. Always use oven mitt or pot holder.

SLIDE RACK POSITIONS

There are 4 possible positions for the slide racks. There is an upper and a lower slot; the rack can also be inverted for 2 additional positions (D).

WHEN IN USE, ALWAYS USE OVEN

IN USE, ALWAYS USE OVEN

MITTS OR POT HOLDERS WHEN

TOUCHINGM TTS OR POOUTERHOLDERS

ANY OR INNER

WHENSURFATOCEHINGOF THEANYOVENUTER.

OR INNER SURFACE OF THE

OVEN

GETTING STARTED

• Remove packing materials and any stickers. Peel off clear protective film from control

panel.

Position 1

Use lower slots along oven walls. Insert rack using a rack-down position.

Position 3

Use upper slots along oven walls. Insert rack using a rack-down position.

Position 2

Use lower slots along oven walls. Insert rack using a rack-up position.

Position 4

Use upper slots along oven walls. Insert rack using a rack-up position.

•	Wash all parts as instructed in Care and Cleaning.
• Select a location for the unit. Leave some space between the back of the unit and
	your wall to allow heat to flow without damaging cabinet and walls.
• Insert crumb tray underneath the bottom heating elements.
•	Untie the cord and unwind it.

• Plug unit into electrical outlet. 0 00 shows on the digital display (C).

Important: During the first few minutes of use, you may notice smoke and a slight odor. This is normal and is not a cause for concern.

C

HELPFUL INFORMATION ABOUT YOUR OVEN

•You can change the temperature from ˚F to ˚C by pressing the ▲ and ▼ buttons simultaneously.

•For your convenience, the unit always remembers the last selected setting unless unplugged. You can change this setting before the oven begins preheating or once it has reached the preset temperature and time.

•You cannot change the temperature or time during the preheat cycle. Once the set temperature is reached, you can then change the temperature or time at any time.

D

5 6