JVC HM-DH30000U manual VHS/VHS Recording, To pause recording, To stop recording

EN 27

S-VHS/VHS Recording

	Load a cassette
1 Make sure the record safety tab is intact. If not,
	cover the hole with adhesive tape before
	inserting the cassette.
	Select recording channel
2 On the front panel:
	Press CH + or –.
	On the Remote:
	a–	Press CH + or –.
		or
	b–	Press the Number keys.
	Set tape speed
3 Press HS/STD/LS3/SP/EP (			) to set the

recording speed.

4 Start recording

On the front panel:

Press REC ( ¦ ).

On the Remote:

While holding REC ( ¦ ), press PLAY ( 3 ).

●If “V, CALIBRATION” is set to “ON” (default setting: ☞ pg. 53), this VCR checks the tape condition for about seven seconds, then starts recording. This means that the first seven seconds of the program will not be recorded. If this is inconvenient for you, follow the steps below:

1 Press REC ( ¦ ) and PAUSE ( 8 ) to start

Video Calibration.

2Then press PLAY ( 3 ) to start recording after Video Calibration is complete.

NOTE:

If “MEMORY FULL” appears on the display when you start recording, the VCR’s memory for the Video Navigation function is full. This is not related to actual recording, so you can finish recording normally, but the Video Navigation information such as recording date, start time, end time, and channel number will not be stored in memory.

To pause recording

Press PAUSE ( 8). To resume recording, press PLAY ( 3).

To stop recording

Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7/0 ) on the front panel.

To rewind the tape (when it is not running)

Press REW ( 1 ).

To fast-forward the tape (when it is not running)

Press FF ( Á ).

To eject the tape

Press STOP/EJECT ( 7/0 ) on the front panel when the tape is not running.

●You can also eject the cassette when the VCR is turned off.

To turn off the VCR

Press POWER.

Compatibility Of Cassettes And Recording Mode

		Recording Mode
Cassette
	D-VHS	S-VHS	VHS
D-VHS	Yes	Yes	Yes
S-VHS	No	Yes	Yes
VHS	No	Yes*	Yes

*To record on the VHS cassette with S-VHS quality, use the S- VHS ET function. (☞pg. 29)

NOTES:

●The D-VHS (MTP), S-VHS and VHS mode recordings are possible with this VCR.

●To record in the D-VHS mode, use a D-VHS cassette.

●To record in the S-VHS/VHS mode, you can use a D-VHS, S-VHS or VHS cassette.

It may be unlawful to record or play back copyrighted material without the consent of the copyright owner.

To record in S-VHS mode on D-VHS tapes:

Press D-VHSto turn off the D-VHS indicator. Then, set “S-VHS MODE” to “ON” (☞ pg. 57).

To record in VHS mode on D-VHS tapes:

Press D-VHSto turn off the D-VHS indicator. Then, set “S-VHS MODE” to “OFF” (☞ pg. 57).