JVC HM-DH30000U manual Tuner Setting, Setting channels automatically, Access Tuner Set Up screen

EN 13

Tuner Setting

Turn on the VCR and the TV, and select the AV mode on the TV.

VCR TV CABLE/DBS

1 2 3

4 5 6

7 8 9

0

23

1423

Setting channels automatically

— Auto Channel Set

Use Auto Channel Set only if channels have not been set correctly by the Plug & Play setting. If you want to add or delete channels, and want to use the ghost reduction function, use Manual Channel Set (☞ pg. 14).

1Access Main Menu screen

Press MENU.

2Access Tuner Set Up screen

Press %Þ to move the	MAIN MENU
highlight bar (arrow) to	VIDEO NAVIGATION
“TUNER SET UP”, then
	FUNCTION SET UP
press OK.	3 TUNER SET UP
	INITIAL SET UP
	i. LINK SET UP
	PRESS (5°), THEN (OK)
	PRESS (MENU) TO END

3Perform Auto Channel Set

You can automatically	TUNER SET UP
set the receivable
	BAND	CATV
channels in your area in
	3 AUTO CHANNEL SET UP
the order of their	MANUAL CHANNEL SET
frequencies.	GUIDE CHANNEL SET
	CABLE BOX SET UP
Press %Þ to move the	DBS RECEIVER SET UP
	PRESS (5°), THEN (OK)
highlight bar (arrow) to	PRESS (MENU) TO END

“AUTO CHANNEL SET

UP”, then press OK. AUTO CHANNEL SET UP

NOTES:

SCANNING...

●When Auto Channel Set

is complete, “SCAN COMPLETED” appears

on screen. PRESS (MENU) TO END

●If the scan was

unsuccessful, “SCAN COMPLETED–NO SIGNAL” appears on screen. Check the

connections and start again.

4Return to normal screen

Press MENU.

INFORMATION

The VCR selects the correct band (TV or CATV) automatically during Auto Channel Set.

The selected band will be displayed on the right side of “BAND” on the Tuner Set Up screen.