JVC HM-DH30000U manual Cable Box Brand Setting, Turn on the cable box, Enter cable box brand code

EN 67

Cable Box Brand Setting

2			3–13
VCR TV CABLE/DBS			POWER
			ENTER
1	2	3	3–2
4	5	6
7	8	9	Number
	0

3–3

TV CH +/–

CABLE BOX BRAND NAME	BRAND CODE
ARCHER	01, 05, 17
CABLETENNA	01, 17
CABLEVIEW	15, 16, 17, 21, 25
CITIZEN	15, 16, 17, 21, 25
CURTIS	02
DIAMOND	01, 17
EASTERN	19
GC BRAND	15, 16, 17, 21, 25
GEMINI	15
GENERAL INSTRUMENTS	01, 04, 06, 11, 12, 15, 28
HAMLIN	10, 18, 19, 23
JASCO	15
JERROLD	01, 04, 06, 11, 12, 15, 28
NOVAVISION	02
OAK	07
PANASONIC	13, 14
PULSER	15, 16, 17, 21, 25
RCA	13, 14
REGAL	10, 18, 19, 23
REGENCY	19
REMBRANDT	01, 16, 17
SAMSUNG	05, 16, 24
SCIENTIFIC ATLANTA	02
SIGMA	07
SL MARX	05, 16, 17, 24, 25
SPRUCER	13, 14
STARGATE	05, 15, 16, 17, 21, 24, 25
TELEVIEW	05, 16, 24
TOCOM	01, 04, 16
UNIKA	01, 17
UNIVERSAL	16, 17, 25
VIDEOWAY	03, 09, 22
ZENITH	03, 09, 22

This Remote can control some functions of the cable boxes listed below. Some cable box brands have more than one code. If your cable box does not function with a specified code, try other codes.

1 Turn on the cable box

Turn on the cable box using the Power button on the cable box or its Remote.

2 Set remote operation mode

Set the VCR/TV/CABLE/DBS selector to “CABLE/ DBS”.

3Enter cable box brand code

Follow the example shown below.

1Press and hold POWER.

2Press the Number keys to enter your cable box’s brand code by referring to the table below.

3Press STOP ( 7 ), and release POWER.

●Once you have set the Remote to operate the cable box, you do not have to set it until you replace the batteries from the Remote.

4 Operate cable box

First set the VCR/TV/CABLE/DBS selector to “CABLE/DBS”, then press one of the following buttons: POWER, TV CH +/–, and Number keys.

●For some brands, you must press ENTER after having pressed the Number keys to enter a channel number.

●To change the cable box’s channels, press TV CH +/– or the Number keys. (The CH +/– button can be used to change the VCR’s channels only.)

●To operate the VCR, set the VCR/TV/CABLE/ DBS selector back to “VCR”.

NOTES:

●Depending on the type of cable box, some or all functions cannot be operated using this Remote.

●It’s not possible to operate a cable box not equipped with a remote sensor.

●It’s not possible to set the Remote for both your cable box and a DBS receiver at the same time. You can only set the Remote control to operate one of these units at a time.

(Ex.) To set the Remote to RCA 14:

POWER	4
1		STOP
. , ?	DHI
Hold	Press in succession	Release
down