JVC HM-DH30000U manual Select Jlip ID Set Up screen, Jlip ID SET UP, then

EN 61

JLIP ID Number Setting

VCR TV CABLE/DBS

1	2	3	4
4	5	6
7	8	9
	0

23

152 – 4

The JLIP (Joint Level Interface Protocol) terminal is used to connect the VCR to a personal computer or similar device. By connecting through the JLIP terminals, you can control the VCR during editing and certain other operations, from the connected personal computer or similar device.

When connecting this VCR to another device using the JLIP terminals, each device must have a different JLIP ID number.

The JLIP ID number of this VCR is preset to “1” when shipped from the factory. You can change this number to any other number between 1 to 99.

To change the JLIP ID number of this VCR, follow the procedure below.

1Access Main Menu screen

Press MENU.

2Access Initial Set Up screen

Press %Þ to move the highlight bar (arrow) to “INITIAL SET UP”, then press OK.

3Select JLIP ID Set Up screen

Press %Þ to move the	INITIAL SET UP
highlight bar (arrow) to	CLOCK SET UP
“JLIP ID SET UP”, then
	3 JLIP ID SET UP
press OK.
	PRESS (5°), THEN (OK)
	PRESS (MENU) TO END

4 Set JLIP ID Number Press the Number keys to enter the desired ID number, then press OK.

JLIP ID SET UP

1

PRESS NUMBER KEY (O-9) OR (23), THEN (OK)

PRESS (MENU) TO END

5Return to normal screen

Press MENU.

NOTE:

For further details on the JLIP system or devices, consult your

nearest JVC dealer.

U.S. customers can contact JVC directly toll free at 1-800-252- 5722.