JVC HM-DH30000U manual Press the appropriate, Cable BOX Brand List

EN 17

6AccessPress OKCable. Box Brand Set screen

Enter cable box brand
7 Press the appropriate	CABLE BOX BRAND SET UP
Number keys to enter
		1
the brand code from the
list shown to the right,
then press OK.

CABLE BOX BRAND LIST

BRAND	CODE
ARCHER	1, 5, 17
CABLETENNA	1, 17
CABLEVIEW	15, 16, 17, 21, 25
CITIZEN	15, 16, 17, 21, 25
CURTIS	2, 8
DIAMOND	1, 17
EASTERN	19
GC BRAND	15, 16, 17, 21, 25

●If the cable box’s channel changes to 9, setting is complete Press OK and “CABLE BOX CONTROL IS ON” appears on the screen for about 5 seconds, then it returns to the normal screen.

PRESS NUMBER KEY (0–9)

THEN (OK) TO TEST PRESS (MENU) TO END

CABLE BOX BRAND SET UP

1

DID YOUR CABLE BOX CHANGE TO CHANNEL 09?

2YES 3 NO

PRESS (2 3), THEN (OK)

PRESS (MENU) TO END

GEMINI	15
GENERAL INSTRUMENTS	1, 4, 6, 11, 12, 15, 28
HAMLIN	10, 18, 19, 23
JASCO	15
JERROLD	1, 4, 6, 11, 12, 15, 28
NOVAVISION	2, 8
OAK	7, 20
PANASONIC	13, 14
PULSER	15, 16, 17, 21, 25
RCA	13, 14
REGAL	10, 18, 19, 23
REGENCY	19
REMBRANDT	1, 16, 17

●If the cable box’s channel does not change to 9

1 Press @ # to move the highlight bar to

“NO”.

2Press OK.

3Repeat step 7 until the cable box’s channel

changes to 9 by entering another code.

4If the channel does not change after going through all the code numbers listed for your model of cable box, then try all the other numbers.

If the VCR’s clock has not been set (with AUTO CLOCK set to ON)

“CABLE BOX USERS SET CLOCK MANUALLY” appears for about 5 seconds when you press OK in step 6, then the Clock Set screen appears.

Perform Manual Clock Set on page 12. If you press MENU after the clock has been set, the Cable Box Brand Set screen appears.

SAMSUNG	5, 16, 24
SCIENTIFIC ATLANTA	2, 8
SIGMA	7, 20
SL MARX	5, 16, 17, 24, 25
SPRUCER	13, 14
STARGATE	5, 15, 16, 17, 21, 24, 25
TELEVIEW	5, 16, 24
TOCOM	1, 4, 16
UNIKA	1, 17
UNIVERSAL	16, 17, 25
VIDEOWAY	3, 9, 22
ZENITH	3, 9, 22

NOTES:

●The Controller may not work with all types of cable box.

●If your cable box does not respond to any code, you cannot use the Controller to change cable box channels. In this case, make sure to leave the cable box turned on and tuned to the proper channel before the scheduled start time of timer recording.

Contact your cable company about the possibility of exchanging your current cable box with the one compatible with your VCR.

●The VCR can only change the cable box channel through the Controller during timer recording.

●If your cable box cannot be operated with a remote control (because it has no remote sensor), you cannot use the Controller to change its channels. Make sure to leave the cable box turned on and tuned to the proper channel before the scheduled start time of timer recording.

●If the VCR’s memory backup expires because of a power failure, set the cable box output channel and brand again.

●For customers in U.S.A.: If you are unable to set the

Controller, contact JVC toll free at 1-800-252-5722.