JVC HM-DH30000U manual Basic Playback Features, 22 EN, Changing display information, Time Counter

22 EN BASIC PLAYBACK AND RECORDING (cont.)

Basic

Playback

Features

Turn on the VCR and the TV, and select the AV mode on the TV.

C

D –1 STOP/EJECT ( 7/0 )

E

VCR TV CABLE/DBS

A Changing display information

Press DISPLAY during playback.

Each time you press the button, the front display panel shows the time counter, the clock time and the tape remaining time in sequence .

Time Counter Clock Time

Tape Remaining Time

●To display the VCR status including the time counter and the clock time on the TV screen, see “Showing on- screen display” (☞ pg. 29).

●“COUNT” appears on the screen when the time counter is shown. “REMAIN” appears on the screen when the tape remaining time is shown.

●When the tape remaining time appears, “” also lights on the front display panel.

●The tape remaining time is calculated based on the tape speed being used. The indicated remaining time is only an estimate.

To reset the time counter, press C. RESET on the Remote. The counter reading becomes “0:00:00”. It is also reset when a tape is inserted.

B Checking tape position

C. RESET

1 2

4 5

78

0

3 A

6

9

D –2

C

The tape position indicator appears on the screen in the following cases:

●When you change the VCR operation mode from the stop mode to fast forward or rewind mode.

●When you perform an Index Search (☞ pg. 24) or Instant Review (☞ pg. 25).

– 1:23:45	33
B		E

The position of “ ” in relation to “B” (Beginning) or “E” (End) shows you where you are on the tape.

STOP ( 7 )

NOTES:

●“SUPERIMPOSE” must be set to “ON”, or the indicator will not appear (☞ pg. 56).

●It may take a few seconds for the tape position indicator to be displayed.