Whirlpool 9763375 Installation Instructions, Electrical Requirements, Prepare Location

Page 6

Electrical Requirements

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

IMPORTANT: The hood must be electrically grounded in accordance with local codes and ordinances, or in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, latest edition, or Canadian Electrical Code, CSA C22.1

If codes permit and a separate ground wire is used, it is recommended that a qualified electrical installer determine that the ground path is adequate.

A copy of the above code standards can be obtained from:

National Fire Protection Association

One Batterymarch Park, Quincy, MA 02269

CSA International

8501 East Pleasant Valley Road

Cleveland, Ohio 44131-5575

■A 120-volt, 60-Hz, AC-only, 15-amp, fused electrical circuit is required. A time-delay fuse or circuit breaker is also recommended. It is recommended that a separate circuit serving only this hood be provided.

■Do not ground to a gas pipe.

■Check with a qualified electrician if you are not sure range hood is properly grounded.

■Do not have a fuse in the neutral or ground circuit.

■The range hood must be connected with copper wire only.

■The range hood should be connected directly to the fused disconnect (or circuit breaker) box through flexible armored cable or flexible metallic conduit.

■Wire sizes must conform to the requirements of the National Electrical Code, ANSI/NFPA 70, latest edition, or CSA Standards C22.1-94, Canadian Electrical Code, Part 1 and C22.2 No. 0-M91, latest edition, and all local codes and ordinances.

INSTALLATION INSTRUCTIONS

Prepare Location

■Do not cut a joist or stud unless absolutely necessary. If a joist or stud must be cut, then a supporting frame must be constructed.

■Before making cutouts, make sure there is proper clearance within the ceiling or wall for exhaust vent.

■We recommend the hood be installed 30"–36" (76.2 cm – 94.1 cm) above the countertop.

■Check your ceiling height and the hood height maximum before you select your hood.

WARNING

Excessive Weight Hazard

Use two or more people to move and install range. Failure to do so can result in back or other injury.

1.If possible, disconnect and move freestanding or slide-in range from cabinet opening to provide easier access to rear wall. Otherwise put a thick, protective covering over countertop, cooktop or range to protect from damage or dirt.

2.Select a flat surface for assembling the unit. Cover that surface with a protective covering.

WARNING

Excessive Weight Hazard

Use two or more people to move and install range hood. Failure to do so can result in back or other injury.

3.Using 2 or more people, lift range hood onto protective covering.

4.Determine and mark the centerline on the wall where the canopy hood will be installed.

5.Select a mounting height between 30" and 36" (76.2 cm and 94.1 cm) above the range to the bottom of the hood and mark reference line on the wall.

NOTE: For installation locations with reduced ceilings heights, the vent hood may be installed using the upper vent cover for both vented and non-vented (recirculating) installations.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents WALL-MOUNT Canopy Range Hood Table of Contents Range Hood SafetyTable DES Matières Important Safety Instructions Tools and Parts Installation RequirementsProduct Dimensions Location RequirementsVenting Methods Installation ClearancesVenting Requirements Calculating Vent System LengthInstallation Instructions Electrical RequirementsPrepare Location Installation locations with reduced ceiling heights Vent Cover Support Bracket InstallationVent Installations Vented installationsInstall Range Hood Install Vent for vented installations onlyMake Electrical Connection Complete Installation Install FiltersCheck Operation Range Hood Care Cleaning and MaintenanceRange Hood USE OperationRequesting Assistance or Service AccessoriesWhirlpool Corporation Major Appliance Warranty Wiring Diagram Sécurité DE LA Hotte DE Cuisinière Votre sécurité et celle des autres est très importanteConservez CES Instructions Dimensions du produit Exigences DinstallationExigences demplacement Outillage et piècesEspacements dinstallation Exigences concernant lévacuationMéthodes dévacuation Spécifications électriques Calcul de la longueur effective du circuit dévacuationInstructions Dinstallation Préparation de lemplacementInstallation du circuit dévacuation Installation de la hotte de cuisinièreInstallation de la bride du cache-conduit Installation avec décharge à lextérieurAchever linstallation Raccordement électriqueInstallation des filtres Contrôle du fonctionnementCuisinière FonctionnementNettoyage et entretien Remplacement des filtres à charbon AccessoiresInstallation des filtres à charbon Remplacement dune lampeSi vous avez besoin de pièces de rechange Demande Dassistance OU DE ServicePour pièces, accessoires et service au Canada Pour plus dassistanceGarantie DES Gros Appareils Ménagers Whirlpool Corporation Garantie Limitée DE UN ANSchéma DE Câblage Imprimé en Italie

9763375 specifications

The Whirlpool 9763375 is a high-performance appliance that exemplifies quality and innovation in everyday kitchen tasks. Designed to meet the needs of modern consumers, this multifunctional kitchen tool combines superior engineering with user-friendly features, making it a staple in any household.

One of the most notable features of the Whirlpool 9763375 is its convenience and versatility. Designed with a sleek and compact profile, it seamlessly fits into various kitchen layouts. The appliance comes equipped with multiple cooking functions, including boiling, steaming, and warming, which makes meal preparation a breeze. This flexibility allows users to experiment with various cooking styles, accommodating the diverse needs of families and food enthusiasts.

The Whirlpool 9763375 incorporates advanced technologies that enhance performance and efficiency. One key feature is the rapid heat-up technology, which significantly reduces cooking time by providing consistent and efficient heating. This technology not only saves time but also energy, making it an eco-friendly choice for those looking to minimize their carbon footprint.

Another hallmark of the Whirlpool 9763375 is its commitment to safety. The appliance is designed with an automatic shut-off feature that ensures safe operation. This is particularly beneficial for busy households where multiple tasks are underway at once, as it provides peace of mind and reduces the risks of accidents in the kitchen.

In terms of ease of use, the Whirlpool 9763375 boasts an intuitive control panel and easy-to-read digital display. This functionality allows users to set timers and adjust cooking settings with minimal effort. Additionally, the appliance is constructed from high-quality materials, ensuring durability and longevity. The easy-to-clean surfaces are designed to resist stains and spills, simplifying maintenance and upkeep.

Overall, the Whirlpool 9763375 represents a perfect blend of functionality, technology, and safety. With its diverse cooking capabilities, energy-efficient features, and user-friendly design, it is an invaluable asset for any kitchen. Whether you are a seasoned chef or a novice cook, this appliance ensures that you can elevate your culinary experience with ease and confidence.
Top Page Image Contents