Euro-Pro K5345 owner manual Keypad Program Temperature ˚F, Press Quantity Cooking Time

USING YOUR MICROWAVE OVEN

Roast

The convection microwave oven has four pre-programmed settings that make it easy to cook with both convection heat and microwave so that meats can be made juicy and tender with just the right amount of browning and crispness. To use the “Roast” feature:

1.Press “Roast” button once.

2.Select the pre-programmed setting that you wish to use by pressing the number keys “1-4”.

Keypad	Program	Temperature ˚F
1	Comb1	300˚F
2	Comb2	350˚F
3	Comb3	400˚F
4	Comb4	450˚F

3.Using the number, enter the cooking time.

4.Press “Start” to begin cooking.

Note: The maximum cooking time that you can program is 99:99 (99 minutes and 99 seconds). The timer will start to count down when the “Start” button is pressed.

Note: If you want to check the temperature during the cooking cycle, press the “Roast” button once and the digital display will show you the selected temperature.

5.When cooking is complete, the microwave will beep 4 times to let you know that it has finished cooking and the display will show “END”.

6.Before starting another cooking session, press the “Stop/Cancel” button to clear the display and reset the system.

Note: If you want to temporarily stop the cooking process, press the “Stop/Cancel” button on the control panel once to stop it and then press the “Start” button to restart. If you want to cancel a cooking process, press the “Stop/Cancel” button twice to cancel.

Popcorn

This feature has been preset to cook a regular bag of popcorn (100 grams or .22 lb.) automatically without having to select the power level or the cooking time. To make popcorn:

1.Press the “Popcorn” button once. The microwave oven will default automatically to the default time and the digital display will show 2:40.

2.Press the “Start” button.

Note: If the cooking time is not acceptable or you are making a bigger batch of popcorn, you can change the cooking time by:

3.Press the “Popcorn” button twice.

4.Use the keypad to enter a desired cooking time.

5.Press “start” to begin.

6.When cooking is complete, the microwave will beep 4 times to let you know that it has finished cooking and the display will show “END”.

7.Before starting another cooking session, press the “Stop/Cancel” button to clear the display and reset the system.

Note: The new popcorn time that you programmed will remain whenever you use the “Popcorn” feature until you reset it again. To reset the programmed time, you can do it as described above or unplug the microwave oven and re- insert the plug back into the electrical outlet. This will reset to the default factory setting.

Reheat

The “Reheat” feature allows you to reheat any meal.

1.Press the “Reheat” button once and the digital display will show the default cooking time of 4:10.

2.Press the “Start” button.

3.When reheating is complete, the microwave will beep 4 times to let you know that it has finished cooking and the display will show “END”.

4.Before starting another cooking session, press the “Stop/Cancel” button to clear the display and reset the system.

Note: If you want to temporarily stop the cooking process, press the “Stop/Cancel” button on the control panel once to stop it and then press the “Start” button to restart. If you want to cancel a cooking process, press the “Stop/Cancel” button twice to cancel.

Potato

The “Potato” feature is pre-programmed to cook potatoes.

1.Press the “Potato” button once to select the size of the potatoes. Press once for small potatoes approximately 4-5 ounces or twice for larger potatoes approximately 6-7 ounces.

2.Using the keypad, enter the quantity of potatoes that you are cooking up to four (4) at a time.

Press	Quantity	Cooking Time
Potato
Once	1	3:50
Once	2	7:10
Once	3	11:00
Once	4	14:00
Twice	1	5:40
Twice	2	10:00
Twice	3	15:00
Twice	4	19:00

3.Press the “Start” button.

4.When the set time is finished, the microwave will beep 4 times to let you know that it has finished cooking and the display will show “END”.

5.Before starting another cooking session, press the “Stop/Cancel” button to clear the display and reset the system.

6.After the cooking program has finished, let the potatoes stand in the oven for 5-10 minutes.

Note: If you want to temporarily stop the cooking process, press the “Stop/Cancel” button on the control panel once to stop it and then press the “Start” button to restart. If you want to cancel a cooking process, press the “Stop/Cancel” button twice to cancel.

8