Before Using Your
Garbage Can & Central Vac System
Turbo Brush Instructions
1.Read all instructions before using your Garbage Can & Central Vac System for the first time.
2.Remove all packing materials and fully assemble unit as instructed on page 5 before operating.
DO NOT LEAVE UNIT UNATTENDED WHEN IN USE.
WARNING: FULLY ASSEMBLE UNIT BEFORE OPERATING.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, THE POWER CORD MUST BE DISCONNECTED BEFORE REMOVING THE DUST BAG, THE
3.Using your thumb and index finger, simultaneously squeeze the locking tabs on either side of the trap door and lift off. (Fig. 13) Doing so will remove the trap door and allow you access to the turbine for cleaning and maintenance purposes.
(Fig. 14)
Locking |
Tabs |
4.There may be some dust, lint, hair, etc on the turbine wheel. Remove as much of this as possible.
5.You may also use the unit’s hose with crevice tool attached and use the vacuum to remove any additional debris from the turbine.
6.Ensure that the turbine wheel moves freely by rotating it with your finger. If the turbine does not rotate, call
7.Once clean, replace the trap door of the turbo brush. Ensure that it clicks into place.
CHECKS.
WARNING: NEVER OPERATE THE VACUUM WITHOUT THE VACUUM BAG AND ALL THE FILTERS IN PLACE
Using Your Garbage Can & Central Vac System
as a Traditional Garbage Can
The Garbage Can & Central Vac System can be used as a garbage can and vacuum, or it can be used solely as a traditional garbage can. To use this
No filters are needed for use as a traditional garbage can, however the use of plastic garbage bags are highly recommended for sanitary reasons. The garbage bin fits 8 gallon garbage bags (not included with unit).
Maintenance & Cleaning Instructions
The following instructions should be followed in order to keep the unit clean and functioning:
•When garbage bag is full, remove cover and take out garbage bag.
•Should any garbage residue remain in the garbage bin, wipe clean using a damp cloth, and then wipe dry using a soft, dry cloth. A mild cleaning product may be used to remove persistent garbage residue.
•Before further use of garbage can, replace with a new garbage bag immediately.
•Wipe outer metal enclosure with a damp cloth. Should any garbage residue remain on the outer metal enclosure, wipe clean using a damp cloth, and then wipe dry using a soft, dry cloth. A mild cleaning product may be used to remove persistent garbage residue.
Fig. 13
Trap Door |
Turbine |
Fig. 14
4 | 9 |