Operating Instructions
DO NOT LEAVE UNIT UNATTENDED WHEN IN USE.
WARNING: FULLY ASSEMBLE UNIT BEFORE OPERATING.
WARNING: NEVER OPERATE THE VACUUM WITHOUT THE VACUUM BAG AND ALL THE FILTERS IN PLACE
Bag and Filter Instructions
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, THE POWER CORD MUST BE DISCONNECTED BEFORE REMOVING THE DUST BAG, THE
WARNING: NEVER OPERATE THE VACUUM WITHOUT THE VACUUM BAG AND ALL THE FILTERS IN PLACE.
HOW TO OPERATE
Using the Dust Inlet
1. | Ensure vacuum bag and filters are |
| in place before using. |
2. | Plug unit into outlet. Check that the |
| power cord is not damaged or wet |
| before use. |
Dust
Inlet
Cover
VACUUM BAG
How to Remove and Replace the Vacuum Bag
Note: The vacuum bag is located in the base of the unit.
The vacuum bag full indicator light
5.Remove the vacuum bag from the vacuum bag holder. (Fig. 9) The vacuum bag should slide out easily from the vacuum bag holder. Put the dirt and dust filled vacuum bag in the garbage bin.
Vacuum
3. Push the power button to turn on the |
unit. When the unit has been turned |
Suction |
Intake |
will go on to indicate that the bag is full and needs to be replaced. To replace
Slide
Bag
Holder
on, the power indicator light will go |
on. (Fig. 5) Once the unit is on, |
sweep the dirt/dust to the dust inlet. |
The dust inlet will then suck up the |
dirt/dust. To turn the unit off, push |
the power button a second time. |
Power
Indicator
Light
Power
Button
Fig. 6
3. Attach desired accessory to hose. | |
| Attach extension tubes as |
| necessary. |
• | Dusting Brush |
| Use on furniture, drapes, and |
• | walls. |
Crevice Tool | |
| Use on furniture and between |
• | cushions. |
Small Turbo Brush | |
• | Use on furniture. |
Floor Turbo Brush | |
the bag perform the following steps:
1.Unplug unit.
2.Lift off the outer metal enclosure from the base of the unit.
3.Remove the vacuum bag cover. (Fig. 7)
vacuum
bag holder
upwards
Fig. 9
6.Take a new vacuum bag and attach it to the vacuum bag holder by sliding the vacuum bag’s cardboard front into the grooves of the vacuum bag holder. It should slide in easily. (Fig. 10) DO NOT
REUSE THE VACUUM BAG.
Fig. 5
Using the Central Vac System
1.Ensure vacuum bag and filters are in place before using.
2.Remove dust inlet cover and insert hose into suction intake. (Fig. 6)
Use on floors or carpets. |
4. Once having attached the desired |
accessory, you may push the power |
button to turn the unit on and start |
the suction. To stop suction push |
the power button once more. |
Fig. 7
4.Press on the vacuum bag release, in order to release the bag and remove it. (Fig. 8)
Vacuum Bag
Release Button
Slide
vacuum
bag holder
upwards
Vacuum
Bag
Holder
Fig. 10
Fig. 8
7.Press on the vacuum bag release, and align the hole on the vacuum bag holder with the suction intake hole under the vacuum bag release button. Once aligned and in place, stop pressing the vacuum bag release in order for it to remain in place.
6 | 7 |