Euro-Pro KP81E owner manual French Fry Blade Assembly, Operating the Blender, Processing Examples

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

French Fry Blade Assembly

CAUTION: Make sure that the unit is unplugged from the power source and the operating button is “OFF” before inserting or removing attachments.

Note: The French Fry Blade is already assembled to the blade holder. Do not try to remove it. (fig. 12)

1.Make sure that the blade storage cover is closed during use.

2.Fit the processor bowl and spindle as detailed previously.

3.Using the finger holes in the french fry blade holder, fit it over the spindle and press firmly into place as indicated.

(fig. 13)

WARNING: USE EXTREME CAUTION WHEN HANDLING BLADES. BLADES ARE SHARP.

4.Fit the lid and click into place as indicated in Setting Up section (page 4).

5.Plug in the processor.

6.WARNING: USE THE FOOD PUSHER TO ADD FOOD INTO THE PROCESSOR BOWL THROUGH THE FEEDER TUBE.

Do not overload the bowl. In one operation, you can process a maximum 6 cups (1500 ml) of food.

Fig. 12

Fig. 13

Operating the Blender

Setting up:

1.	CAUTION: Make sure that the unit is unplugged
	from the power source and the the Speed
	Control Dial is in the "Off" position before
	inserting or removing any attachments and
	before cleaning.
2.	Place the food processor bowl onto the
	processor body. (fig. 14)
3.	When fitted correctly, the handle will fit into the
	slot at the base of the unit.
4.	Place the food processor lid on the bowl and
	lock in place by turning counter clockwise.
	(fig. 15) Make sure that NO ATTACHMENTS
	are inside the food processor bowl when you
	are using the blender.
5.	Open the safety cover by pressing on the safety
	cover release button. (fig. 16)
6.	Place the blender jar in the opening and turn
	counter clockwise to lock in place. (fig. 17)
7.	WARNING: Never operate the blender without
	the blender lid in place. When processing hot
	ingredients, remove the measuring cap from the

Fig. 14

Fig. 15

Processing Examples

Blade A	Blade B	Blade C	Blade D	Blade E
For fine slicing:		Blade A - Recommended speed level is High
		(Cucumbers, raw potatoes, lettuce, carrots)
For coarse slicing:		Blade B - Recommended speed level is High
		(Cabbage, carrots, onions)
For fine shredding:		Blade C - Recommended speed level is High
		(Carrots, cucumbers, cabbage)
For coarse shredding: Blade D - Recommended speed level is High
		(Lettuce, carrots, apples)
For Grating:		Blade E - Recommended speed level is High

blender lid to allow steam to escape. (Fig. 18)

8. Recommended speed level for blending is "2"

(high). When blending soft vegetables or fruits

start with level "1" (low) and then go to level "2"

(high). For hard vegetables or fruit always use speed level "2" (high).

IMPORTANT: Do NOT load the blender with more than 10 oz. (300 gr.) of hard vegetables at one time. Do NOT operate continuously for more than 20 seconds at one time.

NOTE: You can crush 16 oz. (500 ml) of ice cubes in the blender using the PULSE/TURBO button. CAUTION: To prevent spilling (overflow) do NOT operate the blender with than 4 cups (1000 ml) of soft liquid (i.e. soup) at one time.

*Always operate the blender with the blender lid in place.

*When blending hot liquids, always remove the small measuring cap in the blender lid.

*Avoid contact with moving parts at all times.

*Keep hair, clothing as well as spatulas and other kitchen utensils out of the blender jar while in operation to reduce the risk of severe injury to persons or damage to the blender. A spatula may be used but ONLY when the unit is not in use.

Fig. 16

Fig. 17

Fig. 18

7

8