Know your Kenwood kitchen machine, Before plugging

KENWOOD CHEF AND MAJOR KM010 – KM020 series

know your Kenwood kitchen machine

before using your Kenwood appliance

●Read these instructions carefully and retain for future reference.

●Remove all packaging and any labels. safety

●Switch off and unplug before fitting or removing tools/attachments, after use and before cleaning.

●Keep your fingers away from moving parts and fitted attachments.

●Never leave the machine on unattended.

●Never use a damaged machine. Get it checked or repaired: see ‘service’, page 7.

●Never operate the mixer with the head in the raised position.

●Never let the cord hang down where a child could grab it.

●Never let the power unit, cord or plug get wet.

●Never use an unauthorised attachment or more than one attachment at once.

●Never exceed the maximum capacities on page 3.

●When using an attachment, read the safety instructions that come with it.

●Take care when lifting this appliance as it is heavy. Ensure the head is locked and that the bowl, tools, outlet covers and cord are secure before lifting.

●This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

●Children should be supervised to ensure that they do not play with the appliance.

●Only use the appliance for its intended domestic use. Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions.

before plugging in

important - UK only ● Make sure your electricity supply is the same as the one shown on the underside of your machine.

●The wires in the cord are coloured as follows: Blue = Neutral, Brown = Live.

●The appliance must be protected by a 13A approved (BS1362) fuse.

●For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the fuse cover is lost then the plug must not be used until a replacement can be obtained. The correct fuse cover is identified by colour and a replacement may be obtained from your Kenwood Authorised Repairer (see Service).

●If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY. An electric shock hazard may arise if an unwanted non-rewireable plug is inadvertently inserted into a 13A socket outlet.

●This machine complies with European Economic Community Directive 89/336/EEC.

before using for the first time

1Remove all packaging.

2Wash the parts: see ‘care and cleaning’, page 7.

3Push excess cord into the cord stowage compartment at the back of the machine.