Key, To use your smoothie blender, Hints

Note:

●For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the fuse cover is lost then the plug must not be used until a replacement can be obtained. The correct fuse cover is identified by colour and a replacement may be obtained from your Kenwood Authorised Repairer (see Service).

●If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY.An electric shock hazard may arise if an unwanted non-rewireable plug is inadvertently inserted into a 13A socket outlet.

●This appliance conforms to EC directive 2004/108/EC on Electromagnetic Compatibility and EC regulation no. 1935/2004 of 27/10/2004 on materials intended for contact with food.

before using for the first time

●Wash the parts: see ‘cleaning’.

key

stirrer

cap

lid

goblet

sealing ring

blade assembly

power unit

tap assembly

to use your smoothie blender

1Fit the sealing ring over the blade assembly.

2Screw the goblet onto the blade assembly.

3Screw the tap assembly onto the

goblet. Check that the dispensing tap lever is in the off position .

4Place the assembled goblet on the power unit.

5Place the liquid ingredients into the goblet.

●This includes fruit (not frozen), fresh yoghurt, milk and fruit juices. These can be placed into the goblet to the level marked LIQUIDS.

6Add ice or frozen ingredients to the goblet.

●This includes frozen fruit, frozen yoghurt, ice cream or ice. These can

be added up to the level marked

FROZEN INGREDIENTS.

7Screw the lid onto the goblet.

8Either put the cap into the lid, then turn. Or place the stirrer in the hole.

●The stirrer can be used when

blending thick mixtures or when large quantities of frozen items are used.

9Press the MIX button for up to 30 seconds, this is to start the mixing process, then press the SMOOTH button. Allow the ingredients to blend until smooth.

●Use the stirrer by moving it in an anti

clockwise direction.

10 Place a glass underneath the tap, press the MIX button and press down on the dispensing tap lever.

●Thinner drinks may dispense without having to switch on the power unit.

●Use the stirrer to assist when dispensing thick smoothie drinks.

●To help dispense the last amount of a thick smoothie drink, add a few tablespoons of liquid to increase the flow.

●When the glass is full, switch off and release the lever.

Switch off, remove the goblet and pour the drink.

hints

●To make a thinner smoothie drink add more liquid.

●To make a thicker smoothie drink add more frozen ingredients but do not exceed the frozen limit marked on the goblet.

●Before fitting the lid, push the solid ingredients into the liquid using the stirrer.

●Use the PULSE button to operate the power unit in a start stop action to control the texture of your drink. Take care as this automatically selects the higher speed and may cause the drink to be thrown up the sides and onto the lid of the goblet.