Carriage Tray Support ARM KEY Carriage Pivot

not exceed 200 parts per million concentration of available chlorine. For example, mixing 1 tablespoon of 5.25% sodium hypochlorite bleach with 1 gallon of water yields a solution containing 200 ppm of available chlorine. Solution with concentrations greater than 200 ppm will accelerate corrosion of metals. Maximum exposure to sanitizing solution varies with temperature and concentration. Rinse with clean water.

Reassemble the sharpener to the mounting bracket by sliding the left slot on the sharpener over the left guide pin on the bracket while tilting slightly (Fig. 7). Then, press down on the right side of the sharpener so the locking hole fits over the right guide pin on the bracket. Slide the Lock Lever to the right to lock the sharpener in position. Make sure the sharpener is securely engaged to the pins on the bracket.

Carefully reassemble the Top Knife Cover by putting it in position (three guide pins). Lock by turning the Latch Knob to the left while lowering the Top Knife Cover; then, release the Latch Knob and turn it to the right until snug.

Replace the Deflector below the slicer knife: Guide bottom of socket onto mount and rotate upwards.

Make sure the digits etched on the Key (Fig. 8) match the last three digits of the slicer serial number. To reinstall the Carriage Tray / Support Arm: Hold it with both hands and lower it so the Key at the bottom of the Support Arm fits into the slot of the Carriage Pivot (Fig. 8). The Carriage Tray should rest almost horizontal (Fig. 4). Return the Carriage Tray to the Gauge Plate by tilting to the left. Turn the Knob on the Carriage Tray / Support Arm clockwise until snug.

The model 2612 slicer has a cleaning leg underneath the machine. To engage the cleaning leg, raise the front of the slicer by lifting the front of the slicer base. The cleaning leg will swing straight down. Pull the cleaning leg all the way to the front so the slicer is completely supported before cleaning underneath (Fig. 9).

To clean under the model 2712 slicer, raise the Lift Lever past center to its stop (Fig. 10). After cleaning, return the slicer to its normal position by slowly retracting the Lift Lever.

DO NOT wash any slicer components in a dishwasher. DO NOT immerse slicer base or motor in water.

SHARPENER

KNIFE

GAUGE PLATE

LOCK LEVER

PL-40863-1

Fig. 7

CARRIAGE TRAY /

SUPPORT ARM

KEY

CARRIAGE PIVOT

PL-41253-1

Fig. 8

CLEANING LEG

PL-40866-1

Fig. 9

LIFT LEVER – RAISED PAST CENTER

PL-41254-1

Fig. 10

If using a chlorinated sanitizing solution, dilute per manufacturer’s guidelines. Rinse with fresh water.

NOTE: Failure to follow use, care, and maintenance instructions may void your Hobart warranty.

– 7 –

ML-104822 specifications

The Hobart ML-104822 is a state-of-the-art commercial mixer designed to meet the demanding needs of professional kitchens and foodservice establishments. Renowned for its durability, versatility, and efficiency, the ML-104822 stands out as a vital tool in various culinary operations, from bakeries to restaurants and catering services.

One of the main features of the Hobart ML-104822 is its powerful motor. This heavy-duty mixer is equipped with a robust 1.5 horsepower motor that ensures consistent performance, even when handling large batches of dough or batter. The motor operates at multiple speeds, making it suitable for a wide range of tasks, from gentle mixing to rapid whipping. This flexibility allows chefs to achieve optimal results for different recipes while saving valuable time in the kitchen.

The construction of the ML-104822 further enhances its reliability. Made from high-quality stainless steel, the mixing bowl can safely accommodate up to 20 quarts of ingredients. This capacity makes it ideal for preparing large quantities of dough, making it a favorite among bakers who require efficiency without compromising quality. The stainless steel design also facilitates easy cleaning and long-term durability, essential in a busy food environment.

Another significant technological advancement in the Hobart ML-104822 is its user-friendly design. The mixer features a simple control panel with intuitive speed settings, allowing operators to adjust the mixing speed with ease. Additionally, the machine is equipped with a safety guard that not only protects users but also prevents accidental spills. The bowl lift mechanism is another innovative feature, permitting effortless elevation or lowering of the bowl for easy ingredient access and mixing.

In terms of versatility, the ML-104822 supports various attachments, such as dough hooks, wire whips, and flat beaters, enabling chefs to tackle numerous culinary tasks. This adaptability enhances its value in the kitchen since one machine can perform multiple functions, reducing the need for multiple appliances.

Overall, the Hobart ML-104822 is a powerful and durable commercial mixer that excels in performance and versatility. Its robust motor, spacious stainless steel bowl, user-friendly design, and compatibility with various attachments make it an essential asset for any professional kitchen looking to elevate its productivity and efficiency. Whether mixing, whipping, or kneading, the Hobart ML-104822 delivers reliable results every time.