Maintenance, Knife Sharpening, Service

MAINTENANCE

KNIFE SHARPENING

The Hobart cast stainless steel knife will provide long service in normal food retail or commercial kitchen use. However, in high volume applications where it is a practice to sharpen the knife frequently or even daily, the knife will be expended in a shorter time.

Sharpen only when necessary; prolonged or too frequent sharpening results in unnecessary knife wear.

WARNING: UNPLUG MACHINE POWER CORD.

Turn the index knob fully clockwise to close the gauge plate. Remove the Top Knife Cover by rotating the Latch Knob counterclockwise and lifting it off the slicer. Thoroughly wash the area around the knife, the exposed knife surfaces, and the knife edge. Fat from meat or cheese should not be allowed to transfer from the knife to the sharpener.

Plug in machine power cord. Start the slicer by pulling the start switch forward until it starts and then releasing it.

With your left hand, lift the sharpener handle until horizontal. Pull the sharpener handle fully forward for 5 seconds (Fig. 11). Slowly release the sharpener handle. If necessary, repeat sharpening for another 5 seconds.

Turn the slicer off. Unplug machine power cord. Wipe the slicer with a clean damp cloth to remove any grinding particles. Replace the Top Knife Cover.

TO SHARPEN:

PULL SHARPENER HANDLE FULLY FORWARD

FOR 5 SECONDS

TOP KNIFE COVER

IS REMOVED

Fig. 11

PL-40917-1

LUBRICATION — Carriage Slide Rod

Lubricate the Carriage Slide Rod with Lubriplate FMO-200-AW oil (supplied). Either squirt 8 – 10 drops every 2 – 3 months (depending on usage) in the Wick Hole on the Carriage Transport (Fig.12). Or, once monthly, apply 4 – 5 drops directly on the Carriage Slide Rod on each side of the Carriage Transport (Fig.12).

To apply oil, pull out the telescoping tube on the oil bottle, aim the tube, and squeeze gently on the

sides of the bottle. After applying oil, move the CARRIAGE SLIDE ROD Carriage Tray back and forth a few times so the oil

spreads over the entire length of the slide rod.

OVERLOAD RESET BUTTON — MODEL 2712

WICK HOLE

CARRIAGE TRANSPORT

PL-41146-1

Fig. 12

Push the reset button underneath the slicer near the right-front foot if the carriage motor overloads.

SERVICE

Contact your local Hobart-authorized service office for any repairs or adjustments needed on this equipment.

FORM 34141 (12-98)

– 8 –

PRINTED IN U.S.A.

ML-104822 specifications

The Hobart ML-104822 is a state-of-the-art commercial mixer designed to meet the demanding needs of professional kitchens and foodservice establishments. Renowned for its durability, versatility, and efficiency, the ML-104822 stands out as a vital tool in various culinary operations, from bakeries to restaurants and catering services.

One of the main features of the Hobart ML-104822 is its powerful motor. This heavy-duty mixer is equipped with a robust 1.5 horsepower motor that ensures consistent performance, even when handling large batches of dough or batter. The motor operates at multiple speeds, making it suitable for a wide range of tasks, from gentle mixing to rapid whipping. This flexibility allows chefs to achieve optimal results for different recipes while saving valuable time in the kitchen.

The construction of the ML-104822 further enhances its reliability. Made from high-quality stainless steel, the mixing bowl can safely accommodate up to 20 quarts of ingredients. This capacity makes it ideal for preparing large quantities of dough, making it a favorite among bakers who require efficiency without compromising quality. The stainless steel design also facilitates easy cleaning and long-term durability, essential in a busy food environment.

Another significant technological advancement in the Hobart ML-104822 is its user-friendly design. The mixer features a simple control panel with intuitive speed settings, allowing operators to adjust the mixing speed with ease. Additionally, the machine is equipped with a safety guard that not only protects users but also prevents accidental spills. The bowl lift mechanism is another innovative feature, permitting effortless elevation or lowering of the bowl for easy ingredient access and mixing.

In terms of versatility, the ML-104822 supports various attachments, such as dough hooks, wire whips, and flat beaters, enabling chefs to tackle numerous culinary tasks. This adaptability enhances its value in the kitchen since one machine can perform multiple functions, reducing the need for multiple appliances.

Overall, the Hobart ML-104822 is a powerful and durable commercial mixer that excels in performance and versatility. Its robust motor, spacious stainless steel bowl, user-friendly design, and compatibility with various attachments make it an essential asset for any professional kitchen looking to elevate its productivity and efficiency. Whether mixing, whipping, or kneading, the Hobart ML-104822 delivers reliable results every time.