Nuvo NV-T2DF manual Custom Regional Setup, Tuning Parameters, Fine Tuning, Audio Output Level

Page 22

4.1Custom Regional Setup: Some countries operate at a tuning standard outside the four preset regions. The Custom setting allows specific parameters. One determining factor for tuning is the “Pre-emphasis”. The two choices for this a are 50µS (microseconds) and 75µS. The custom setting also allows for specific setting of the minimum and maximum tuning capability and the individual tuning steps for FM and AM.

4.1Custom Regional Setup

4.2Tuning Parameters: This section determines how the T2 tunes up and down. Seek/Scan Levels for each band, FM, AM, and Weatherband sets the signal strength parameter for searching stations. The lowest level 0 causes the tuner to stop at any frequency with a very low signal. Level 4 (High), stops only when a very strong signal is detected. The factory default is Level 2 (Medium), which searches for a moderate signal. This setting changes the necessary signal threshold, which is the minimum signal level required for the T2 to recognize it and lock on to the frequency.

4.2 Tuning Parameters

4.3Fine Tuning: When checked, Fine Tuning changes the tuning standard for FM from the default tuning to .05 MHz step tuning, and AM will tune by single kHz increments, rather than the default 10 kHz for USA and Canada, and 9 kHz for Europe. The smaller tuning steps allow access to all station frequencies.

4.3Fine Tuning

4.4Audio: Output Level increases or decreases the level of signal from the audio output of each tuner. This setting and balance, treble, and bass are best left at the default settings for use with an audio distribution system such as NuVo systems, that have built-in equalization capability. You may want to make adjustments when the T2 is being used as a stand-alone component with an amplifier.

4.4Audio Output Level

Page 22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Page English NEC National Electrical Code NV-T2DF Wiring Diagram Diagram is shown with the NuVo Concerto System and NuVoNetFront Panel 10 11 12 13 14Back Panel NV-T2RC3 Remote Control Power The power button turns the selected tuner on and offStereo Audio Connections Direct IR ControlUsing the Aux. Input IR Pass-ThruAntenna Input USB and RS232 CommunicationII. Front Panel Menu Controls InfoAdvanced Settings Audio Settings Auto-ONAUX Input Noise BlankingNV-T2DF Configurator software, Assigning III. Stand-alone Front Panel Use of the T2Source Switching Signal Strength/Stereo IndicatorUsing the Memory Feature StereoSetting Up the Tuner for NuVoNet IV. Using the T2 with the Concerto NuVoNetMaking the Connection T2DF Configuration Software, Advanced Settings Operating the T2 with the Concerto Display PadConfig T2 Configuration SoftwareStart Preset Information PresetsBrightness Advanced Config Advanced ConfigBank and automatically add it to the T2s presets Add Bank Rename BankFine Tuning Custom Regional SetupTuning Parameters Audio Output LevelLevel CategoriesHigh Cut FM Freqs Download ConfigurationCategories Tab AM FreqsInfrared Section Audio SectionGeneral Successful Download

NV-T2DF specifications

The Nuvo NV-T2DF is a state-of-the-art multi-zone audio distribution amplifier designed to enhance the home audio experience. This innovative product is part of Nuvo’s robust line of whole-home audio solutions, enabling users to enjoy high-fidelity sound throughout their living spaces seamlessly.

One of the most notable features of the NV-T2DF is its advanced architecture, allowing it to distribute audio to up to six zones within a residence. This multi-zone capability ensures that different audio sources can be played simultaneously in various rooms, meeting the diverse preferences of household members. Each zone can be controlled independently, providing flexibility and convenience.

The NV-T2DF utilizes Class D amplification technology, which delivers high efficiency and low heat output compared to traditional Class A/B amplifiers. This results not only in an environmentally friendly device but also contributes to longevity and reliability. The amplifier offers 50 watts per channel, ensuring robust audio performance and the ability to drive a range of speaker types without distortion, even at higher volumes.

Connectivity is a key feature of the NV-T2DF. It integrates seamlessly with various audio sources, including streaming services, local digital libraries, and direct connections from mobile devices. The device supports both wired and wireless connections, making it versatile for any setup. The inclusion of built-in Bluetooth capability allows users to stream music directly from their smartphones or tablets, enhancing the listening experience.

User interaction with the NV-T2DF is straightforward, thanks to its intuitive interface and compatibility with third-party control systems. The device can be easily managed through mobile apps or wall-mounted keypads, enabling quick adjustments to volume or source selection.

Additionally, the amplifier supports high-resolution audio formats, ensuring that listeners enjoy an exceptional quality of sound. With features like zone grouping and independent volume control, the NV-T2DF is engineered to cater to varying audio needs within the home.

Overall, the Nuvo NV-T2DF is an impressive audio distribution solution that combines advanced technology with user-friendly features. It is designed for those who appreciate the nuances of sound and wish to create personalized audio experiences in their homes. With its combination of efficiency, performance, and flexibility, the NV-T2DF stands out as a premier choice for audio enthusiasts and homeowners alike.
Top Page Image Contents