Nuvo NV-A4DS-UK Improperly wired CAT5 cable, Keypad does not work, Use a CAT5 tester, Keypads

Page 21

Troubleshooting

Symptom

Probable Cause

Remedy

When the keypad is plugged in there is a

Improperly wired CAT5 cable.

Check that you are using the 568A or B

loud pop through the speakers and the

 

wiring standard (see Section I: Crimping

keypad does not work.

 

CAT5 wire). The best way to know is to

 

 

use a CAT5 tester.

When the keypad is plugged in, it just

Assigning duplicate addresses to multiple

Each keypad must have a unique address

flashes and has no functionality.

keypads.

set with the Zone Address rotary switch

 

 

located on the back of the keypad (see

 

 

Section VI, Installing the Simplese

 

 

keypads, page 10).

The keypad or keypads will not change source independently. They all change source at the same time.

Source Grouping is turned on.

Each keypad has the ability to be set as a source group or remain independent. Use the Mute button and the Source 3 button to turn the Source Group feature on and off (see Section VI, Source Grouping, page 11).

All the keypads change when a source is selected on only one.

The keypads are set for Source Grouping.

Pressing the MUTE and Source 3 button simultaneously sets the Source Grouping feature. This will cause multiple keypads to always share the same source (see Section VI, Zone EQ and Source Grouping, page 11).

With the keypads plugged in, the POWER LED on the front of the amplifier will not turn on.

One or more improperly wired CAT5 cables.

Make sure that the amplifier is plugged

 

into a reliable power source. Test that the

 

POWER LED on the amplifier turns on

 

when the Allport Cable is unplugged and

 

plugged in again. Next, unplug all the

 

CAT5 cables from the Allport and plug

 

them back in one at a time until the bad

 

cable(s) is discovered.

18

Page 20 Page 22
Image 21
Page 20 Page 22
Contents NV-A4DS-UK Page English 103 FrenchTable of Contents Introduction Simplese Wiring Diagram Stand-by LED Attached to an active AC power outletSource Inputs SourcesMute Simultaneously Volume Source equipmentZone IR ReceiverOn and off SetupStep-by-Step Crimping Instructions End of the wire is terminated with an RJ45 connectorIII. Allport Termination and Installation II. Speaker Wire TerminationIV. Installing the Simplese Amplifier VI. Keypad and Zone SetupIR Outputs Volume Reset EQ Control and Source GroupingAll Off Master Mode/All On VII. Using the fixed and Variable Lineouts Zone 4 keypad controls the audio volumeDiagram shown using the NuVo P2100 amplifier VIII. Using the Link Jack to Create Eight Zones Diagram shown using the NuVo P2100IX. Mute Input and the NuVo MI1 LSA40 Back LSA40 Front LSA40 Local Source AmplifierLSA40PD Front When the keypad is plugged in, it just Improperly wired CAT5 cableKeypad does not work Use a CAT5 testerModel audio output creates a hum IR emitters remain constantly litSimplese D Specifications Addendum Page Page Page Page NuVo Technologies Arbor Tech Drive, Hebron, Kentucky, USA

NV-A4DS-UK specifications

The Nuvo NV-A4DS-UK is a sophisticated audio distribution system that brings high-quality sound and advanced technology into residential settings. Designed for versatility and efficiency, this system caters to the growing demand for multi-zone audio solutions in modern homes.

One of the standout features of the NV-A4DS-UK is its capability to support up to four audio zones. This allows users to independently control audio playback in different areas of their home, providing the flexibility to enjoy personalized listening experiences. Whether it's hosting a party in the living room, unwinding in the bedroom, or enjoying music on the patio, the Nuvo system ensures that everyone can enjoy their preferred sound environment.

The Nuvo NV-A4DS-UK utilizes advanced Class D amplification technology, ensuring that the audio output is not only powerful but also energy-efficient. Class D amplifiers are known for their compact size and high efficiency, making them ideal for residential applications where space and energy conservation are important factors. The system delivers clear and robust audio across a range of frequencies, making it suitable for various music genres.

A key characteristic of the NV-A4DS-UK is its compatibility with a broad array of audio sources. Users can stream music from their favorite services such as Spotify, Apple Music, and more, and can also connect traditional sources such as CD players and vinyl turntables. This versatility ensures that the system adapts to various listening preferences and technological advancements.

The system is also designed for easy control. The Nuvo NV-A4DS-UK comes with a user-friendly interface, allowing users to manage the audio settings and zones effortlessly. Additionally, it supports integration with smart home systems, enabling users to control their audio through voice commands using devices like Amazon Alexa or Google Home.

Installation of the NV-A4DS-UK is streamlined thanks to its modular design. This allows installers to adapt the system to different home layouts and requirements, ensuring a seamless integration into existing home audio setups.

In summary, the Nuvo NV-A4DS-UK is a powerful and versatile audio distribution system that incorporates advanced technologies and user-friendly features. With its multi-zone capabilities, efficient amplification, wide source compatibility, and smart home integration, it stands out as an excellent choice for anyone looking to enhance their home audio experience.
Top Page Image Contents