Hobart HEC5X ML-126753, HEC5D ML-126751, HEC5 ML-126750 manual Maintenance, Replacing Lamps, Service

Page 16

MAINTENANCE

WARNING: THE OVEN AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING, OR PERFORMING ANY MAINTENANCE.

WARNING: DISCONNECT ELECTRICAL SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH TO INDICATING THAT YOU ARE WORKING ON THE OVEN BEFORE PERFORMING ANY MAINTENANCE.

The fan motor comes with sealed bearings and requires no lubrication.

Annually check the vent, when cool, to be sure it is free of obstructions.

REPLACING LAMPS

1.Allow oven to cool.

2.Remove all racks by pulling forward, lifting up and out.

3.Unscrew glass dome(s) from light body.

4.Replace the bulb(s).

5.Reassemble glass dome(s) and racks by reversing the disassembly procedure.

SERVICE

Contact your local Hobart-authorized service office for any repairs or adjustments needed on this equipment. Long-term service contracts are available on this and other Hobart products.

FORM 34492 Rev. A (Jan. 2002)

– 16 –

PRINTED IN U.S.A.

Page 15 Page 16
Image 16
Page 15 Page 16
Contents Truct ONS Table of Contents Features & Options DEC & HEC Series Electric Convection Ovens GeneralInstallation Electrical Connections Assembling the Stand to the OvenElectrical Data Assembling Stacked Ovens Electrical Connections Stacked Ovens Operation Controls Models DEC5/HEC5/HEC5XUsing Models HEC5/HEC5X Before First USE All ModelsPreheating CookingControls Models HEC5D/HEC5DX Manually Setting the Temperature and Cook Time To Program Menu Item and Rack Number Cook TimesAlways Set the Temperature Before Setting the Time To Display the Actual Oven TemperatureStarting a Timed Cycle On All Racks To End a Cooking CycleSetting the Oven for Cook & Hold Cook & Hold Operation Models HEC5D and HEC5DXProper Utensils Operating HintsCooking Guidelines Holding Feature Cooking GuidelinesStandard Cooking Time Chart Power OutageCleaning Optional Stainless Steel Oven InteriorService MaintenanceReplacing Lamps
Top Page Image Contents