Hobart HEC5X ML-126753, HEC5D ML-126751, HEC5 ML-126750, DEC5 ML-126749 Assembling Stacked Ovens

Page 6

ASSEMBLING STACKED OVENS

Unpack the ovens and the stack kit. Position the oven to be used as the bottom oven on its left side for access to the oven bottom, taking care not to scratch or damage it.

Attach the four leg assemblies with the 24 bolts and lockwashers (six per leg).

Place the lower oven (with legs) on the floor and remove two 7/16" (11 mm) diameter knockouts on each side of the top cover.

Install two locating studs to the bottom of the top oven per stacking kit instructions.

Move the oven with legs to the installed position. Place the upper oven on top of the lower oven using the locating studs.

Remove the optional rear panel, if provided, from the TOP oven. Install the Stacking Flue (Fig. 3) with the four screws provided. Replace the top oven rear panel, if provided.

STACKING FLUE

PL-53463

Fig. 3

– 6 –

Image 6

Contents Truct ONS Table of Contents Features & Options DEC & HEC Series Electric Convection Ovens GeneralInstallation Assembling the Stand to the Oven Electrical ConnectionsElectrical Data Assembling Stacked Ovens Electrical Connections Stacked Ovens Operation Controls Models DEC5/HEC5/HEC5XPreheating Using Models HEC5/HEC5XBefore First USE All Models CookingControls Models HEC5D/HEC5DX Manually Setting the Temperature and Cook Time To Program Menu Item and Rack Number Cook TimesStarting a Timed Cycle On All Racks Always Set the Temperature Before Setting the TimeTo Display the Actual Oven Temperature To End a Cooking CycleProper Utensils Setting the Oven for Cook & HoldCook & Hold Operation Models HEC5D and HEC5DX Operating HintsCooking Guidelines Holding Feature Cooking GuidelinesCleaning Standard Cooking Time ChartPower Outage Optional Stainless Steel Oven InteriorMaintenance ServiceReplacing Lamps