Hobart LX18H ML-104351 Manager Programming Machine Must Be In Ready Mode, Parameter Display Shows

Page 19

MANAGER PROGRAMMING (Machine Must Be In READY Mode)

To enter the Manager Programming Mode, you must first enter the Operator Programming Mode by pressing and holding "LX40" on the control panel (this is the HIDDEN key), then pressing WASH. Once you are in the Operator Programming Mode, press SELECT until PROGRAM is lit. Press and hold the HIDDEN key, then press WASH again to enter the Manager Programming Mode.

The possible options to edit are listed in the following table. Use SELECT to move through each parameter. When the parameter you wish to reprogram is displayed, use UP ARROW to change the value. After the correct value is displayed, press SELECT to lock in the displayed value and to move to the next programming option. The programming range of values for each parameter is shown in the table under Programmable Variables and Recommended Settings — Models LX40H & LX40C, page 20.

 

PARAMETER

DISPLAY SHOWS

 

Sump temperature.

PROGRAM, with the display alternating between SUMP

 

 

 

and the programmed temperature.

 

Booster temperature ("H" model only)

PROGRAM, with the display alternating between BOOST

 

 

 

and the programmed temperature.

 

°F / °C

PROGRAM, and the °F or °C prompt.

 

 

Detergent pump time.

PROGRAM, DETERGENT, and programmed time.

 

Rinse agent pump ratio.

PROGRAM, RINSE AGENT and programmed ratio.

 

 

Sanitizer pump ratio ("C" Model only).

PROGRAM, SANITIZER and programmed ratio.

 

Cycle selection lockout.

PROGRAM and LOCK or UNLK.

 

 

Default cycle selection. (Default means "cycle

PROGRAM, current default cycle indicator, and the

 

selected upon power-up.")

DEFLT prompt.

 

 

Automatic delime reminder.

PROGRAM, DELIME and programmed number of cycles.

 

Detergent prime time.

PROGRAM, PRIME, and DETERGENT lit with the

 

 

 

programmed time displayed.

 

 

Rinse agent prime time.

PROGRAM, PRIME, and RINSE AGENT lit with the

 

 

programmed time displayed.

 

 

 

 

Sanitizer prime time.

PROGRAM, PRIME, and SANITIZER lit with programmed

 

 

 

time displayed.

 

 

Heavy wash cycle - wash time.

PROGRAM, WASH and programmed time.

 

Heavy wash cycle - rinse time.

PROGRAM, RINSE and programmed time (NORM or

 

 

 

EXTEN).

 

 

Idle shutdown time.

PROGRAM, with display alternating between "SHDN"

 

 

and the programmed shutdown time in hours.

To exit the manager programming mode do one of the following:

1.Press OFF (machine shuts down but does not drain).

2.Press SELECT until the display shows READY.

3.Press and hold the HIDDEN key, then press WASH.

– 19 –

Page 18 Page 20
Image 19
Page 18 Page 20
Contents UCT I O Table of Contents Model Description LX Series Dishwashers GeneralLeveling InstallationUnpacking LocationDrain Plumbing ConnectionsWater Supply LX40H Electrical Connection Electrical DataCover Plate Chemical Sanitizer Models LX18C, LX30C, and LX40C Only Detergent and Rinse AIDInstallation Diagram LX18, LX18C & LX18H Installation Diagram LX30, LX30C & LX30H Installation Diagram LX40C & LX40H Before First USE OperationControls Models LX18, LX18C, LX18H, LX30, LX30C & LX30H Fig Do this Display Shows Remarks Modified Fill and Dump WASH/RINSE Cycle Times Diagnostic MessagesModels LX18, LX18C & LX18H Modified Fill and DumpWASH/RINSE Cycle Times Models LX30, LX30C and LX30HOperating Models LX40H & LX40C Controls Models LX40H & LX40C FigReady Ready ModePriming Chemical Pumps Models LX40H & LX40C WASH/RINSE Cycle TimesCycle Wash Drain Dwell Rinse Operator ProgrammingParameter Display Shows Manager Programming Machine Must Be In Ready ModeFunction Programmable Variables RecommendedPreparation ALL Models DOs and DON’Ts for Your NEW Hobart Warewasher Cleaning ALL Models Deliming General MaintenanceDeliming Models LX18, LX18C & LX18H Deliming Models LX30, LX30C & LX30H Lubrication Deliming Models LX40H and LX40CSymptom Possible Causes TroubleshootingDR1 PRBLM, FILL1 Service

LX18 ML-104349, LX30C ML-104353, LX40H ML-104356, LX40C ML-104355, LX18H ML-104351 specifications

Hobart, a well-known name in the food service industry, offers a variety of high-quality equipment designed to meet the demands of modern kitchens. Among their impressive lineup are the LX30 ML-104352, LX18C ML-104350, LX30H ML-104354, LX18H ML-104351, and LX40C ML-104355 dishwashers. Each model brings a unique set of features and technologies that cater to different operational needs.

The Hobart LX30 ML-104352 is a compact dishwasher ideal for smaller establishments. It boasts a user-friendly digital control panel that enhances operational efficiency. With its powerful wash system, it can handle up to 30 racks per hour, making it perfect for busy environments. The LX30 is designed with a built-in booster heater that ensures optimal sanitization while conserving energy.

Next in line is the LX18C ML-104350, which is specifically tailored for smaller businesses or lower volume applications. This model has a lower profile, making it easy to install in tight spaces. It offers a wash cycle that can process 18 racks per hour, equipped with a robust stainless steel construction that guarantees durability and ease of cleaning. The energy-efficient design aids in reducing operational costs.

For those looking for enhanced performance, the LX30H ML-104354 is an excellent choice. This high-capacity model can wash up to 30 racks per hour, similar to the LX30 but with upgraded features that include an advanced filtration system that minimizes debris and optimizes cleaning performance. Its ergonomic design allows for convenient operation, while the chemical dispensing system provides an added layer of efficiency.

The LX18H ML-104351 model targets establishments that require a lightweight yet efficient dishwasher. It offers flexibility in operation and can process 18 racks per hour. Its space-saving design keeps utility costs down while maintaining rigorous hygiene standards with its built-in high-efficiency wash arms that reach every nook and cranny of dishes.

Finally, the LX40C ML-104355 stands out as a powerful choice for larger operations. Capable of washing up to 40 racks per hour, it is designed for heavy-duty tasks. Cutting-edge technology ensures thorough cleaning and sanitation, while adjustable wash cycles cater to various types of dishware. This model is also equipped with a comprehensive diagnostic system that simplifies maintenance and troubleshooting.

In summary, Hobart's LX-series dishwashers combine advanced features, durability, and efficiency, making them suitable for a range of food service operations from small cafés to large restaurants. With their focus on performance and user-friendliness, Hobart continues to lead the way in commercial dishwashing solutions.
Top Page Image Contents