Before Using Your Toaster Oven, Keep Warm

Read all the sections of this booklet and follow all the instructions carefully.

Before Using Your Toaster Oven

1.Read all of the instructions included in this manual.

2.Make sure that the oven is unplugged and the time control is in the “OFF” position.

3.Wash all the accessories in hot, soapy water or in the dishwasher.

4.Thoroughly dry all accessories and re-assemble in oven. Plug oven into outlet and you are ready to use your new Toaster Oven.

5.After re-assembling your oven, we recommend that you run it at the highest temperature (450°F) on the toast function for approximately 15 minutes to eliminate any packing residue that may remain after shipping. This will also remove all traces of odor initially present.

Please Note: Initial start-up operation may result in minimal smell and smoke (about 15 minutes). This is normal and harmless. It is due to burning of the protective substance applied to the heating elements in the factory.

Keep Warm

Keep cooked food warm for up to 30 minutes. Longer periods of time are not re- commended as food will become dry or will spoil.

Operation

•Set the temperature control to 150°F.

•Turn the function control to “Keep Warm”.

•Turn the time control to the “Stay On” position.

•Turn the time control to the “Off” position when finished with keep warm.

Caution: When sliding trays out of oven, always support the rack. Do not let go until you are sure the rack is securely supported by the rack handle.

Care & Cleaning

Warning: Be sure to unplug the oven and allow it to cool before cleaning.

To clean your oven, wipe the walls with a damp sponge, cloth or nylon scouring pad and mild detergent. DO NOT USE STEEL WOOL SCOURING PADS, ABRASIVE

CLEANERS OR SCRAPE THE WALLS WITH A METAL UTENSIL, AS THIS MAY DAMAGE THE UNIT.

All accessories should be washed in hot soapy water or can be cleaned in a dishwasher. The door can be wiped with a damp sponge and wiped dry with a paper or cloth towel. Clean the outside with a damp sponge. DO NOT USE AN ABRASIVE

CLEANER AS IT MAY DAMAGE THE EXTERIOR FINISH.

DO NOT USE AN ABRASIVE CLEANER OR STEEL WOOL SCOURING PAD ON THE DRIP PAN AS IT MAY DAMAGE THE PORCELAIN ENAMEL FINISH.

LET ALL PARTS AND SURFACES DRY THOROUGHLY PRIOR TO PLUGGING OVEN IN AND USING.