Be sure to set the RC68+ to the same number

Page 8

Model PA635

4.C-BAL Command. Instantly returns the balance to the Center position (equal volume in each channel) from any previous setting.

5.Balance Commands. When the Balance "arrow" buttons are pressed, the audio output will move to the left or right (with a 2 dB/step reduction in the attenuated channel) with each left or right press.

NOTE: These commands do not ramp. That is, no change will occur if the BALANCE buttons are held down continuously!

6.MAX-V. This command saves a maximum desired volume level for a zone or rooms (both LOCAL and COMMON). The volume is first adjusted to what is desired as a maximum level. The MAX-V button is then pressed, locking in this setting. This acts as a volume limiter for the system (e.g. to prevent the kids from over-driving wall speakers, etc.).

To unlock the MAX-V setting, press the ADJ-OFF button (item #10).

7.MUTE ON/OFF. Separate ON / OFF Mute commands give positive mute action without knowing the actual mute status. This is very helpful in a remote room where commands are sent “blind” without any visual aids for status.

NOTE: In addition to MUTE OFF, the muted condition can be released with VOLume (item #8), Preset Level (item #2) and Balance (items #4 & 5) commands.

8.Volume Up/Down Commands. When pressed in individual steps, volume increase and decrease is 2 dB per step over a range of 0 dB (Max.) to -60 dB. The next step below -60 dB is OFF (> -90 dB). When pressed continuously, volume level will change (ramp) continuously in 1 dB steps. See also MAX-V settings (item 6).

NOTE: Volume action of the PA635 has been designed specifically to ramp more quickly in the DOWN direction and more slowly in the UP direction.

9.Code Group Numbers. The PA635 is capable of being set to 55 different code groups, both individually as amplifier pairs and collectively as a group.

Be sure to set the RC68+ to the same number!

It may be necessary to change the PA635 amplifier pairs to different code groups if you wish to address each pair individually from the COMMON IR BUS (item #15, Fig. 3) or an external common IR bus network when using other Xantech PA635's in large systems, to avoid mutual interaction.

Refer to the RC68+ instructions for code group setting procedures.

NOTE: As shipped from the factory, all amplifier pairs in the PA635 are set to code group number B0.

10.ADJ-OFF Command. This command unlocks a previous MAX-V setting. See also item #6.

PA635 specifications

The Xantech PA635 is a sophisticated audio amplifier designed to elevate the home entertainment experience. With its blend of power, versatility, and advanced technology, the PA635 stands out in the realm of multi-room audio solutions. This amplifier is a reliable choice for both professional installations and private home setups, catering to a diverse range of audio needs.

One of the main features of the Xantech PA635 is its impressive power output. This amplifier delivers a robust 35 watts per channel, allowing it to drive multiple speaker types with ease. It is capable of accommodating 6 channels, which can be particularly advantageous for larger home theater systems or multi-room audio setups. The configuration options offer flexibility, enabling users to tailor their audio experience to their preferences.

The PA635 employs advanced technology to enhance sound quality and ensure consistent performance. It features a high-efficiency design that minimizes heat generation, allowing for prolonged use without overheating. Additionally, the amplifier is equipped with an easy-to-use front panel for quick adjustments and LED indicators that provide visual feedback about the device's status.

Connectivity options are another highlight of the Xantech PA635. The amplifier supports both traditional and modern audio input methods, including RCA and line-level inputs. Moreover, it includes banana plug outputs for seamless speaker connections, ensuring a straightforward installation process. Its compatibility with various audio sources makes it versatile for integration into existing systems.

Another noteworthy characteristic of the PA635 is its compact form factor. The sleek design allows it to fit easily into tight spaces, making it ideal for small rooms or equipment racks. This space-saving feature does not compromise on performance, as the amplifier is built to deliver superior sound output in any environment.

Moreover, the Xantech PA635 boasts robust protection circuits to safeguard against overload and short circuits. This is particularly important in professional installations where reliability and safety are paramount. The amplifier's durability makes it a long-term investment for users seeking a dependable audio solution.

In summary, the Xantech PA635 stands out as a powerful, flexible audio amplifier with a range of features and technologies aimed at enhancing sound quality and user experience. Its combination of performance, connectivity, and compact design makes it an excellent choice for both home and professional audio systems. Whether for casual listening or immersive home theater experiences, the PA635 is designed to meet diverse audio needs with ease.