Xantech PA4100X, FOUR CHANNEL HI-POWER AMPLIFIER Installation Physical Location and Mounting

Page 8

Page 8

Model PA4100X

INSTALLATION - PHYSICAL LOCATION AND MOUNTING

Upper shelf, component, wall, etc.

PA4100X

 

Keep perforations on top cover free

 

of obstructions!

 

 

 

 

 

 

 

 

2-inch spacing (minimum)

To maximize air flow, route

Convection

 

single large opening in lower shelf.

Airflow

Keep perforations on bottom

 

 

plate free of obstructions.

Figure 4 – HORIZONTAL MOUNTING

When mounting the PA4100X, you should plan its location carefully. Pay close attention to each of the following factors:

1.The amplifier is convection cooled. That is, it depends on the natural free flow of air up through the slot perforations in the bottom plate, over the internal heat dissipating fins, then out the top cover, for adequate cooling.

2.If mounted in an equipment cabinet or other confining location, allow at least 2 inches of space above the top cover (see Fig. 4). Be sure there are large openings in the shelf below the unit and in the cabinet to allow the entry of cool air and the escape of warm air.

NOTE: Do not remove feet in shelf-top installations and make sure top and bottom perforations are free from obstruction..

3.If the cabinet contains other heat generating components, you will have to pay even closer attention to adequate ventilation.

4.Do not hesitate to use fans (quiet, boxer type), if necessary, to ensure a constant flow of air through the PA4100X's and the other heat generating components.

5.When mounting in a 19" (483mm) rack, adding a double RU (Rack Unit) above and a single RU below the PA4100X will improve convection in heavy use applications.

[One Rack Unit size = 1-3/4" (44.5mm) in height].

© 2003 Xantech Corporation

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Model PA4100X Four Channel HI-POWER Amplifier Safety Instructions Read Before Operating Equipment Not Expose this Appliance to Rain or MoistureGeneral Information Model PA4100X AmplifierModel PA4100X PA4100X Panel and Feature Descriptions Standby ModePA4100X Rear Panel Features and Functions Page Installation Physical Location and Mounting PA4100X Keep perforations on top cover free ObstructionsConnecting the PA4100X PA435XSpeaker Phasing Using the PA4100X Remote Master ON/OFF Control Terminals Interfacing the PA4100X with an MRC88 Zones 7 Trouble Shooting Problem Probable Cause and SolutionSpecifications Number of channels Power OutputModel PA4100X Xantech Corporation Xantech Corporation

PA4100X, FOUR CHANNEL HI-POWER AMPLIFIER specifications

The Xantech PA4100X Four Channel Hi-Power Amplifier stands out as a robust solution for those seeking high-fidelity audio performance across multiple channels. This amplifier is engineered to deliver superior sound quality and reliable performance, making it an ideal choice for both residential and commercial audio applications.

One of the main features of the PA4100X is its impressive power output. With a total of 100 watts per channel at 4 ohms and 70 watts at 8 ohms, this amplifier is capable of driving a variety of speakers, ensuring that users can enjoy rich, immersive audio without distortion, even at higher volume levels. This makes it particularly suitable for environments where sound clarity and volume are paramount, such as in restaurants, retail spaces, or home theaters.

The PA4100X employs sophisticated technologies that enhance audio performance. It includes built-in protection circuitry that safeguards the amplifier from overheating and short-circuiting, ensuring longevity and reliability. The unit features a comprehensive array of inputs and outputs, allowing seamless integration with other audio components. It supports both unbalanced and balanced connections, providing versatility for different setup configurations.

Another key characteristic of the PA4100X is its compact and sturdy design. The unit is housed in a durable chassis that not only withstands the rigors of daily use but also integrates well with existing audio setups. Its straightforward controls and indicators make it user-friendly, allowing for easy adjustments and monitoring of performance.

Additionally, the amplifier offers efficient cooling solutions, including a fan that operates quietly, ensuring that the unit remains at optimal operating temperatures without adding noise to the listening experience. The PA4100X is equipped with advanced features like adjustable gain controls for each channel, facilitating precise audio balancing and customization based on the listener's preferences.

Overall, the Xantech PA4100X Four Channel Hi-Power Amplifier is a versatile and powerful audio solution designed for those who demand high-quality sound performance across multiple channels. Its combination of features, advanced technologies, and user-friendly design makes it an excellent choice for a wide range of audio applications, where clarity, power, and reliability are essential.
Top Page Image Contents