| Clean filter screen |
|
|
| Monthly |
|
|
| PR 10 M1 |
| |
|
|
|
|
|
|
|
|
|
|
|
|
| Why | To maintain hot air flow |
|
|
|
|
|
|
|
|
|
| Time required | 30 minutes to prepare | 5 minutes to complete |
|
|
|
| ||||
| Time of day | After close | For | ||||||||
| Hazard icons |
|
|
|
|
|
|
|
|
|
|
Tools and supplies
Brush, nylon, pot | McD All Purpose | Bucket, clean and | Bucket, soiled towels |
| Super Concentrate | sanitized towels |
|
| (APSC) solution |
|
|
Frymaster Heated Landing Zone (HLZ) Models HLZ18,
Procedure
1Turn off HLZ and allow to cool.
Allow 30 minutes for the HLZ to cool.
Do not attempt to remove the filter screen from a hot HLZ.
2Remove filter screen.
Lift the screen up and away from the tower.
3Clean filter screen.
Clean the screen with a clean, sanitized towel soaked with McD APSC solution. Use a nylon pot brush for stubborn stains or soil.
Sanitizer solution, McD APSC
4Wipe filter screen with clean, sanitized towel.
Wipe the filter screen with a fresh clean, sanitized towel.
5Reinstall filter screen.
Slip the wire guides on the bottom of the screen into the slots on the tower.
HLZ22
Monthly
PR 10 M1
©McDonald’s Corporation · Planned Maintenance Manual · Revised July 2007 | Page 1 of 1 |