Dualit XL1500 Grating & Shredding Disc, Hold plastic to avoid injury, Medium Bowls

Fit the slicing disc over the spindle and press firmly into place.

GRATING & SHREDDING DISC VARIABLE SLICING & JULIENNE DISC

Do not Use Discs for longer than 45 seconDs at a time. Allow processer to cool if you go over the max run time. Do not use Discs with Auto pulse.

take caUtion as blaDes are sharp. Do not use with Auto pulse.

1 SELECT GRATE	2 LOCK ON SPINDLE	3 LOCATE ON BOWL	1 SLICE THICKNESS	2 LOCK ON SPINDLE	3 FOR LARGE &
					MEDIUM BOWLS

OR

Select the fine or coarse side of the grating/shaving disc to suit your requirement.

NOTE: Very sharp. Hold plastic hub to avoid injury.

Place the reversible grating disc on the spindle and push down firmly to locate.

Place the spindle and grating disc assembly onto the bowl drive of large processing bowl.

To adjust the slicing thickness, rotate the outer spindle anti-clockwise to make slices thicker, or clockwise to make thinner slices. NOTE: Very sharp.

Hold plastic to avoid injury.

The adjustable slicing disc can only be used with the large and medium bowls.

It creates any slice thickness between 0.5mm and 7.5mm.

1 SELECT SHRED 2 LOCK ON SPINDLE 3 LOCATE ON BOWL

1 CORRECT WAY UP 2 LOCK ON SPINDLE	3 FOR LARGE &
	MEDIUM BOWLS

OR

Select the fine or coarse side of the shredding disc to suit your requirement.

NOTE: Very sharp. Hold plastic hub to avoid injury.

Place the reversible shredding disc on the spindle and push down firmly to locate.

Place the spindle and shredding disc assembly onto the bowl drive of large processing bowl.

The julienne disc must be inserted with the cutting face upwards.

NOTE: Very sharp. Hold plastic hub to avoid injury.

Fit the julienne disc over the spindle and press firmly into place.

The julienne disc can only be used with the large and medium bowls.

10

11