Maintenance and servicing.
•Every twelve months the hob should be serviced by a Defy Service agent to ensure continued efficient and safe operation.
•Note: If required, the cleaning of the valves should only be carried out by a qualified Defy technician. i.e. Burner not functioning correctly.
•Removable burner parts should be washed weekly with hot water and detergent.
•Take care to remove any encrustations and ensure that the burner holes are clear.
•The condition of the gas hose and valve should be inspected for leaks every time the gas bottle is
Fitting the burner caps.
•Carefully align the 2 holes in the alu- minium burner cap body with the ig- nition electrode and the flame failure sensor.
•Gently lower the burner cap into po- sition with the
•Centralise and level the burner cap cover onto the burner cap.
Burner
Cap Cover
Fit Burner Cap
Flame failure sensor
Burner
Cap
Burner
Cap
Body
Ignition electrode
Important safety advice.
•When using gas, ensure that the room is well ventilated.
•Always keep children and infirm persons away from the product when it is in use.
•Only use the hob for preparing food.
•Use a deep pan, large enough to cover the appropriate burner.
•Always dry food thoroughly before placing it in hot oil or fat. Frozen food in particular will spit and splatter if added too quickly.
•Never fill the pan more than one third full of fat or oil.
•Never heat fat or fry with a lid on the pan.
•Do not fry too much food at once. This lowers the temperature of the oil or fat and results in fatty foods.
•Do not leave hot fat or oil unattended. If overheating occurs, these could catch fire.
In the event of a pan fire
•Switch off the electrical and gas supply.
•Smother the flames with a blanket or damp cloth.
•Burns and injuries are usually caused by picking up the burning pan and rushing outside with it.
•Do NOT use water to extinguish an oil or fat fire.
Page 6