E L E C T R I C A L R E Q U I R E M E N T S ( U K O N LY )
Before using this appliance ensure that the voltage indicated on the product corre- sponds with the main voltage in your home, if you are in any doubt about your sup- ply contact your local electricity company.
The flexible mains lead is supplied connected to a B.S. 1363 fused plug having a fuse of 13 amp capacity.Should this plug not fit the socket outlets in your home, it should be cut off and replaced with a suitable plug, following the procedure outlined below.
Note: Such a plug cannot be used for any other appliance and should therefore be properly dis- posed of, (having removed the fuse) and not left where children might find it and plug it into a sup- ply socket - with the obvious consequent danger.
N.B. We recommend the use of good quality plugs and wall sockets that can be switched off when the machine is not in use.
IMPORTANT: the wires in the mains lead fitted to this appliance are coloured in accordance with the following code:
GREEN AND YELLOW | EARTH |
BLUE | NEUTRAL |
BROWN | LIVE |
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured green and yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth
symbol 
or coloured green or green and yel- low.
The wire which is coloured blue must be con-
nected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be con- nected to the terminal which is marked with the letter L or coloured red.
When wiring the plug, ensure that all strands of wire are securely retained in each terminal. Do not forget to tighten the mains lead clamp on the plug. If your electricity supply point has only two pin socket outlets, or if you are in doubt, consult a qualified electrician.
Should the mains lead ever require replacement, it is essential that this operation be carried out by a qualified electrician and should only be replaced with a flexible cord of the same size.
If the plug is a
Only 13amp replacement fuses which are ASTA approved to B.S. 1362 should be fitted.
This appliance conforms to the Norms EN 55014 regarding the suppression of radio inter- ference.
WARNING - THIS APPLIANCE MUST BE EARTHED
Green and Yellow to
Earth
Blue to
Neutral
13amp Fuse
Brown to
Live
Cord Clamp