Automatic fast heating, Timer operation

Automatic fast heating

The hob is fitted with a special mechanism which makes the hotplates operate at full power at the start of cooking regardless of the selected setting. After a certain amount of time the hotplate returns to the originally set value.

Activation of automatic fast heating

•Selected hotplate must be set to level “0”

•Touch the sensor “E” and the display switches to the power setting 9.

•Press the sensor “+” (D) of the relevant hotplate and the display indicates the letter “A”

•Select the desired power level.

The power indicator intermittently displays the “A” symbol and the selected power setting. When the fast heating period expires, the hotplate switches to the pre selected power setting. SEE TABLE A:

TABLE A:	Level	1	2	3	4	5	6	7	8	9
	Limit time (S)	1’11’’	2’44’’	4’47’’	5’28’’	6’29’’	1’11’’	2’44’’	2’44’’	...

If the power level is changed during the automatic fast heating on a particular cooking zone, the power boost function is immediately deactivated.

Timer operation

The control device has an incorporated timer, which when activated may be assigned to one of four areas.

•Press the “+” (G) or “-” (H) sensors of the timer. The timer display (I) will show “00”, the other (F) displays “t”

•After setting the timer, a hotplate must be selected within 10 seconds. Selecting a cooking zone with the “+” key (D). The pilot light (L) relating to the hotplate comes on

•Select the required time from between 1-99 minutes with the keys “+” e “-” (G/H).

•If the timer is selected by pressing the “-”key (H), the starting time would be “99” (Maximum value)

•Select the required power setting (1-9) with the keys “+” e “-” (G/H).

The timer is assigned to the selected hotplate. Once the countdown is complete, the hotplate will switch off automatically accompanied by an acoustic signal. Pressing the “+” and “-”keys (G/H) of the timer simultaneously turns off the timer immediately.

Ceran® smooth top

WARNING: In the unlikely event of the Ceran sustaining accidental damage or cracks, switch off the appliance at the mains to avoid electric shock and have the panel replaced before further use.

Caring for the Ceran hob

•Ceran is a tough, durable material, which provides a beautiful, functional and long lasting cooking surface. To keep it looking good, it needs to be treated with care and cleaned regularly.

•Wipe spillage off as soon as possible with a damp cloth, preferably while the hob is still warm.

•Clean the hob with a nylon pad and a suitable smooth top cleaning solution, which is available from all Defy Service Centres. Remove calcium stains (yellow stains) by applying a small amount of lime remover such as vinegar or lemon juice. Other suitable commercially available products can also be used.

•If necessary stubborn spills may be removed using the blade scraper provided.

•Do not use metal scourers or coarse abrasive powders as these could scratch the Ceran.

•Regular cleaning after use will prevent dirt build up and ensure that the hob remains bright and attractive.

•Wipe the hob surround with a damp hot soapy cloth and dry.

•DO NOT USE A STEAM CLEANER.

PAGE 7 OF 12