Personalizing Your MyFi
You can easily adapt your MyFi to the way you listen and use the satellite radio. You can change how the display appears, track stocks and other information, adjust your MyFi’s audio output, and change how you use the display.
Simply press the “menu” button, rotate the dial to high- light an option, and press the dial in to select. Your MyFi guides you with instructions right on the screen.
If you ever get lost or decide not to change anything, press the “menu” button to return to normal operation. Or wait for about 15 seconds and your MyFi reverts by itself.
Adjusting audio
You can ADJUST THE BASS OR TREBLE, which affects both the headphones and audio outputs of the home stand and vehicle cradle.
1. Press the “menu”
button and use the
dial to select “Set
Audio.”
2.Select “Set Tone.”
3.Rotate the dial to high- light either “bass” or “treble.” Press the dial in to select.
4. Rotate the dial to change the bass or treble level. Press the dial in to confirm.
5. When you’re done, press the “menu” button until you return to normal operation.
Caution: Before putting on the headset, always adjust the volume setting at the lowest level to avoid possible hearing damage.
20