Menu Commands and Settings

Roady Guide keys 4" x 4" 8/5/03 1:40 PM Page 13

Section	Select a channel by category		category
	are interested in appears.
	Press either of the category keys			to enter category search.
				category	until a category you
	1. Continue pressing one of the category keys
3	2. Use the Tuning Wheel	to display a channel within the given category.
	3. Press the Tuning Wheel	to select a channel.

4.If you do not select a channel, category search will time out after several seconds.

Save and Recall Artist Name and Song Title Information

You can save the artist name and song title on the current channel for future reference.

memory

1. Press and release to save the current screen information. Up to 15 different artist and song titles can be saved, after which any new information

that is saved will replace the oldest information in memory.

2. To recall saved information, press and hold memory for 3 seconds. Next, use

the Tuning Wheel to display each saved artist name/song title.

				13
Menu Commands and Settings				Section
		menu		Section
Pressing menu enters the menu section of Roady. Here, you can change each of
the following options using the Tuning Wheel		. Select the highlighted item by
pressing the Tuning Wheel	. While in the menu section,		acts as a “back”	4
button, allowing you to back out of existing sections. Following are the settings				4

that can be changed:

Screen Color

Change the color of the display by simply using the Tuning Wheel to scroll through the seven color choices. Select a new color by pressing the Tuning Wheel .

Audio Level

Use this to adjust the Roady Receiver audio-output level if it is too high, causing distortion, or too low for your car. Most users will NOT need to change this level from the factory setting. This is not a volume control. You should set the volume using the audio system connected to your Roady Receiver.

Contrast

This control allows you to adjust the contrast of your display.

Auto-On

Once you have installed your Roady and the power has been turned on using the power button , you will discover your Roady has been factory-set to be turned off and back on again using the ignition key in your vehicle. To change this factory- set condition and always power your Roady on and off with the power button , select the “Auto-On” feature in the menu and then select “Off.”