Basic Operations
Turning Roady2 On and Off
Press 
on the Roady2. When first turned on, the receiver will automatically tune in to the last channel listened to and recall the previous settings.
Basic Channel Selection
Select a channel by number
1.Make sure that Roady2 is in Direct Entry mode. “Direct” should appear in the upper right corner of the display. If A, B, or C appears, press preset/direct until the display says “Direct.”
2.Enter channel number using the number keys, i.e., 5 then 0 for Channel 50.
Set/select channel presets
Your Roady2 can store up to 30 preset channels. They are organized into three different groups (Preset A, Preset B, and Preset C), each with 10 channels corresponding to the 10 number keys. For the tenth preset in each group, press the “0” key.
Selecting channel presets
Presspreset/directuntil an A, B, or C appears in the upper right corner of the display. Press the number key corresponding to the desired preset.
Setting channel presets
1.Tune in the channel you want to register as a preset, making sure it is playing.
2.Select either Preset A, Preset B, or Preset C by pressingpreset/directuntil an A, B, or C appears in the upper right corner of the display.
9
Section 3
Warning: When using this product it is always important to keep your eyes on the road and your hands on the wheel. Not doing so could result in injury to you or to others or in property damage.