XM Satellite Radio SA10085 manual Roady2 Installation, Your Roady2 can be installed as follows

Page 19

the XM audio signal wirelessly to the vehicle’s FM radio. This FM modulator is automatically turned on whenever the cassette adaptor (or other audio jack) is unplugged from the side of the Roady2. One of 12 different frequencies can be selected, as described on page 12. In order to ensure optimum perform- ance, the signal is broadcast to your car’s FM radio from both inside the Roady2, and from the included XM antenna.

19

Section 5

Roady2 Installation

Your Roady2 can be installed as follows:

1. First, attach all of the components as shown in figure 5 (page 17). Insert the 12V power adaptor into the cigarette lighter, and place the antenna on the car’s roof. Turn on the car and Roady2 and insert the cassette audio adaptor into the vehicle’s cassette deck (preferred) or, if the vehicle does not have a cassette deck, find an open FM frequency and tune both the Roady2 FM modulator and the vehicle’s FM radio to that frequency, as described on page 12. Verify that the system is working by tuning to Channel 1. If you are using the wireless FM modulator feature, and static is heard on all frequencies, change to a hard wired FM modulator configuration by using the optional FM Modulator Direct Wiring Adapter described in the Available Accessories section on page 29. Disassemble the system, and proceed with step 2.

2. Identify a hard, flat surface or an available vent within your car to allow the

optimum Roady2 viewing position for the primary

 

user as well as access to the cassette player, power

Warning: The Roady2 should

source, and antenna-cable route. In order to maximize

be placed in your vehicle where it will

visibility, this position should be chosen to minimize

not interfere with the function of safety

glare or direct sunlight on the display. Do not install

features, e.g., deployment of airbags.

the mount where it or Roady2 could block your

Failure to correctly place the Roady2

may result in injury to you or others if

vision, vehicle airbags, or controls. Your Roady2

the unit becomes detached during an

comes with three different mounting options:

accident and/or obstructs the deploy-

direct/flat mount, vent mount, or swivel mount:

ment of an airbag.

Image 19
Contents User FCC ID RS2SA10085 Welcome About Delphi About RoadyAbout XM Contents Getting Started Activating Roady2 Roady2 Display Screen Roady2 ReceiverChannel name, channel number, artist name Turning Roady2 On and Off Basic OperationsBasic Channel Selection Preview and select channels using the Tuning Wheel Save and Recall Artist Name and Song Title Information Changing the DisplayMenu FM Frequency only available when FM modulator is turned onContrast Screen ColorAudio Level TuneSelect Antenna AimingDirect Tune Stock TickerAuto-On Factory DefaultAuto-Off Roady2 Kit Set-up InstallationHooking up your Roady2 Receiver Direct Connect FM Modulator Wireless FM ModulatorCassette Adaptor Your Roady2 can be installed as follows Roady2 InstallationSection Attach car mount to back Removing swivel mount from your dashboardXM Antenna Set-up Antenna InstallationCable Routing Final installation Taking Care of Your Roady2 ReferenceTroubleshooting If you see this on the display You should No SignalIf this happens You should Available Accessories Contacting Product Technical Support and Customer ServiceTechnical Information XM Satellite Radio Limited Consumer Warranty How state law relates to the warranty How you the Customer can get service