LA-316 Mounting Options

LA-316_2005_04_28.qxp 4/28/2005 8:22 AM Page 8

Mounting Options

Mounting Options

You can mount the LA-316 to a microphone stand, or you can use the U bracket to directly mount it to any vertical or horizontal surface.

·Locate the microphone stand nut in the included poly bag,

or use the nut that comes with the microphone stand. · Remove the leatherette handle cover.

·Position the U bracket so that it will hold the LA-316 upright on the microphone stand.

·Screw the nut onto the stand and tighten with a wrench.

·Remove the U bracket by loosening the two screws on both sides of the LA-316. Be careful not to lose the washers.

·Using the two self-tapping screws and (if necessary) hollow wall anchors, mount the bracket to any surface.

·Position the LA-316 into the bracket and tighten the two screws.