Kramer Electronics TP-1xl user manual Figure TP-12xlFront/Rear Panel Features

6.8Getting to Know the TP-12xl Video/Audio Twisted-Pair Line Receiver

The KRAMER TP-12xlVideo/Audio Line Receiver, which is based on the latest technology, works in conjunction with the TP-11xlVideo/Audio Line Transmitter. The TP-12xlallows parallel connection of several units on the same line (one transmitter/multiple receivers) that can be tapped at any point without affecting image quality. When connecting several units, all the termination switches on the rear panel of the TP-12xlmachines, except for the last on the line, should be toggled to the Hi-Z position. The frequency response of the TP-12xlmatches that of the TP-11xltransmitter, and it provides polarity switching on the rear panel.

NOTE

For Installation, operation, maintenance and troubleshooting instructions please refer to sections 8-13.

1

2 3

￿￿￿￿ ￿ ￿￿

					230 VAC
Term Hi-z					50/60Hz
						FUSE
	Line In	Polarity	Video Out	Audio Out
4	5	6	7	8	9

		Figure ￿: TP-12xlFront/Rear Panel Features
		Table 7: TP-12xlFront/Rear Panel Features
No.	Feature		Function
1	Illuminated power switch		Supplies power to the unit.
2	GAIN trimmer		Controls video level of output (accessible from bottom).
3	HF trimmer		Controls cable equalization of the video output (accessible from bottom).
4	Term/Hi-Z switch		Selects "Term" or "Hi-Z"impedance (for looping select "Hi-Z").
5	LINE in telephone socket		Balanced input.
6	Polarity switch		Inverts the incoming balanced signal.
7	BNC Video out connector		Amplified and buffered video output.
8	RCA Audio out connectors		Amplified and buffered audio output.
9	Power Connector		A 3-prong AC connector allows power to be supplied to the unit.
			Directly underneath this connector, a fuse holder houses the appropriate
			fuse.

￿

KRAMER ELECTRONICS LTD.

11