Kramer Electronics TP-1xl user manual Getting to Know the 711/712 xl AV Line Transmitter/Receiver

7.5Getting to Know the 711/712 (xl) AV Line Transmitter/Receiver

The KRAMER 711 (xl) Video/Audio Line Transmitter and the 712 (xl) Video/Audio Line Receiver, part of the KRAMER TOOLS family, are used as a pair for transmitting video and stereo audio over long distances using 3 pairs of wires (6 wires). The frequency response of the system is well over 64 MHz. The machines offer user controlled Video Gain and Video EQ. The system uses the standard RJ-45 connector and wire system (8 wires, 4 pairs), often used for computer network and telephone installation.

NOTE

For Installation, operation, maintenance and troubleshooting instructions please refer to sections 8-13.

Figure ￿￿: 711/712 Y/C Front/Rear Panel Features

Table 14: 712 Front/Rear Panel Features

No.	Feature	Function
1.	RIGHT AUDIO OUT	Right channel audio output.
2.	LEFT AUDIO OUT	Left channel audio output.
3.	LINE in RJ-45 connector or 6 pole	Twisted pair wire input.
	terminal block (712xl)
4.	EQ. VIDEO trimmer	Controls cable equalization.
5.	GAIN VIDEO trimmer	Controls video level of the outputs.
6.	VIDEO OUT BNC connector	Amplified and buffered video output.
7.	ON Led	Illuminates when the machine is powered.
8.	12VDC feed connector	A DC connector that allows power to be supplied to the unit.

Table 15: 711 Front/Rear Panel Features

No.	Feature	Function
1.	RIGHT AUDIO IN	Right channel audio input.
2.	LEFT AUDIO IN	Left channel audio input.
3.	LINE OUT RJ-45 connector or 6	Twisted pair wire outputs.
	pole terminal block (711xl)
4.	Video IN BNC connector	Video input.
5.	ON Led	Illuminates when the machine is powered.
6.	12VDC feed connector	A DC connector that allows power to be supplied to the unit.

￿

KRAMER ELECTRONICS LTD.

16