Aroma AID-513FP instruction manual Error Code Potential Causes

Page 16

TROUBLESHOOTING

Error Code

“E0”

Potential Causes

Circuit error occurred.

Solutions

Turn off the induction cooktop and let it cool down. Once cooled, turn it on again and proceed as normal. If the problem persists, please contact Aroma® customer service toll-free at (800) 276-6286 or through email at CustomerService@AromaCo.com for repair service.

“E1”

“E2”

“E5”

“E6”

No cookware is in place or the cookware being used is not induction-ready.

Sensor may be disconnected or short circuited.

Main sensor is disconnected or short circuited.

Cookware temperature is too high.

Make sure cookware being used is induction-ready. Refer to “Selecting the Right Cookware” on page 4 for an overview of induction-ready cookware.

Please contact Aroma® customer service toll-free at (800) 276-6286 or through email at CustomerService@AromaCo.com for repair service.

Please contact Aroma® customer service toll-free at (800) 276-6286 or through email at CustomerService@AromaCo.com for repair service.

Turn off the induction cooktop to let it cool down. Once cooled, turn it on again and proceed as normal.

14

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Induction Cooktop See what’s cooking with Aroma online Important Safeguards This Appliance is for Household USE only Parts Identification Control PanelSelecting the Right Cookware Cast Iron Enameled Cast Iron Magnetic Stainless SteelRead all instructions and important safeguards Before First USETo Cook with Induction 0 FTo Cook with Induction 029 0 FTo USE the Warm Setting To USE the SAUTÉ/BROWN Setting 0 F 020To USE the Boil Setting 0 F 100To USE the Slow Cook Setting To Clean Troubleshooting Problem Potential CausesError Code Potential Causes Recipes Marinated Spicy Skirt SteakLime-Flavored Potato Wedges Warranty Limited Warranty
Top Page Image Contents