Avanti IM15SS instruction manual Operating your ice maker,  Initial start-up operation

Page 9

Operating your ice maker

Initial start-up operation

1.Plug the appliance into a 115/120v polarized and grounded wall electrical outlet.

2.Place the on-off switch in the “on” position.

3.Make sure the water supply is on. As soon as the inner mechanism reaches the proper temperature, the icemaker mechanism will fill the mold with water.

4.The first cubes may be small because of air in the water line. Later cubes will be of standard crescent moon type size.

5.Approximate time for the first cycle is between 30-40 minutes.

6.Each cycle approximately will take 140 ml of water so you should have a full tray, after 11 hours.

Important: throw away all ice cubes made during the first 3 hours of operation.

•When the ice bucket is full, the ice making mechanism will automatically shut off. However the system will continue to cool and maintain the cubes supply.

•Ice delivery may be interrupted by raising the metal arm into an upright position (see sketch 2)

•If the icemaker is not used regularly, it is recommended that the ice bucket be

 

emptied periodically to insure fresh ice.

 

 

SKETCH 2

•

Sometimes the cubes may appear cloudy. This is cause of no concern and has

 

 

 

nothing to do with the taste or chemical make-up of the water.

 

•

The front grill should be kept free of dust and lint to permit free airflow.

 

• This unit should be defrosted approximately every 4-6 weeks or when frost on the ice maker walls is excessive or ¼” thick. To defrost, turn the unit off, remove cubes and keep door open at least two inches.

Installing the Safety Door Latch (Optional)

Affix the safety door latch to the unit by attaching the assembly to the unit using the screws included (see diagram).

Remove the plastic hole covers from the top left hand side of the unit.

Attach the safety latch arm to the unit by inserting the two

(2)flat head screws in the top two (2) screw holes on the top left hand side of the unit.

Remove the plastic hole cover from the top left hand side of the door and insert the safety pin.

LATCH

PIN

Adjust the latch by moving either one or both flat screws used on the top left hand of the unit until latch locks firmly.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Model Number / No. de Modelo IM15SS ICE MAKER/MAQUINA DE Hacer HieloTable of contents ICE Maker Safety Important Safeguides If you need service Avanti customer serviceHelp us help you… Read this guide carefullyParts and Features Installation instructions Important safety instructions Before using your ice maker  Installation of your ice maker Electrical connection  Connecting the water supply Extension cord  Reversing the door swing of your ice maker Installing the Safety Door Latch Optional Operating your ice maker Initial start-up operation  Power failure  Cleaning your ice maker Vacation time/storage  Moving your ice makerProblem Possible cause Troubleshooting guideAvanti products customer services Service for your ice makerWhat is not Covered Your Avanti Products warrantyThis page Left Blank  Instalación de su máquina de hacer hielo Instrucciones para la instalación Antes de usar su equipoConexión a fuente de agua AdvertenciaComo cambiar la direccion de apertura de la puerta DibujoAviso Guía para solucionar problemas Problema Solución Protect Your Product Registration Information

IM15SS specifications

The Avanti IM15SS is a compact and efficient ice maker designed for those who appreciate both functionality and sleek aesthetics. Ideal for home use, parties, or small commercial spaces, this ice maker delivers convenience without compromising on performance.

One of the standout features of the Avanti IM15SS is its production capacity. It has the ability to produce up to 28 pounds of ice over a 24-hour period, ensuring that there is always a fresh supply of ice on hand for beverages, food preservation, or entertaining guests. The unit can store up to 2.5 pounds of ice at a time, which is ample for those small gatherings or when you need a quick batch.

The design is both modern and practical. The stainless steel finish gives it a sophisticated look that complements a variety of kitchen and bar aesthetics. The compact size means it can easily fit on countertops, making it accessible and convenient without taking up too much precious space.

One of the notable technologies integrated into the Avanti IM15SS is its advanced cooling system. This system utilizes a powerful compressor that ensures rapid ice production while maintaining energy efficiency. The unit operates quietly, which is a crucial feature for home environments where noise reduction is desired.

In terms of usability, the Avanti IM15SS features an easy-to-use control panel with indicator lights that signal when it is low on water or when the ice bin is full. This allows users to easily monitor the status of the ice maker, ensuring seamless operation without the constant need to check on it manually.

The ice produced is bullet-shaped, which is not only aesthetically pleasing but also ideal for cooling beverages quickly without diluting them too rapidly. This type of ice is especially popular in bars and restaurants as it offers both functionality and visual appeal.

Maintenance is straightforward with this model, as it includes a removable ice bucket and a drain plug for easy cleaning. Regular maintenance ensures that the ice maker continues to operate efficiently and remains hygienic for food and drink preparation.

Overall, the Avanti IM15SS is an impressive unit for those seeking a reliable, efficient, and stylish ice maker. Its combination of production capacity, modern design, advanced technology, and user-friendly features makes it a top choice for ice production in various settings. Whether for personal or light commercial use, it's sure to meet the ice-making needs of any customer.
Top Page Image Contents