Important safety instructions

WARNING

To reduce the risk of fire, electrical shock, or injury when using your ice maker, follow these basic precautions:

•Read all instructions before using the ice maker.

•Danger or warning: risk of child entrapment.

child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous. . . Even if they will “just sit in the garage a few days.”

•Before you throw away your ice maker: take off the door. Leave the shelves in place so that children may not easily climb inside.

•Never allow children to operate, play with, or crawl inside the appliance.

•Never clean ice maker parts with flammable fluids. The fumes can create a fire hazard or explosion.

•Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other ice maker. The fumes can create a fire hazard or explosion.

-save these instructions-

Installation instructions

Before using your ice maker

•Remove the exterior and interior packing.

•Check to be sure you have all of the following parts:

•1 ice bucket

•1 plastic scoop

•25 ft. Hose

•1 Safety Latch Assembly

•1 instruction manual

•Before connecting the ice maker to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

•Clean the interior surface with lukewarm water using a soft cloth.

Installation of your ice maker

•This appliance is designed to be recessed or built-in (fully recessed).

•Place your ice maker on a floor that is strong enough to support the ice maker when it is fully loaded. Remember that the unit will be significantly heavier once it is fully loaded. To level your ice maker, adjust the leg at the front of the ice maker.

•Locate the ice maker away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the ice maker not to perform properly.

•Avoid locating the ice maker in moist areas. Too much moisture in the air will cause frost to form quickly on the evaporator requiring more frequent defrosting of the ice maker.

•Plug the ice maker into an exclusive properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.

IM15SS specifications

The Avanti IM15SS is a compact and efficient ice maker designed for those who appreciate both functionality and sleek aesthetics. Ideal for home use, parties, or small commercial spaces, this ice maker delivers convenience without compromising on performance.

One of the standout features of the Avanti IM15SS is its production capacity. It has the ability to produce up to 28 pounds of ice over a 24-hour period, ensuring that there is always a fresh supply of ice on hand for beverages, food preservation, or entertaining guests. The unit can store up to 2.5 pounds of ice at a time, which is ample for those small gatherings or when you need a quick batch.

The design is both modern and practical. The stainless steel finish gives it a sophisticated look that complements a variety of kitchen and bar aesthetics. The compact size means it can easily fit on countertops, making it accessible and convenient without taking up too much precious space.

One of the notable technologies integrated into the Avanti IM15SS is its advanced cooling system. This system utilizes a powerful compressor that ensures rapid ice production while maintaining energy efficiency. The unit operates quietly, which is a crucial feature for home environments where noise reduction is desired.

In terms of usability, the Avanti IM15SS features an easy-to-use control panel with indicator lights that signal when it is low on water or when the ice bin is full. This allows users to easily monitor the status of the ice maker, ensuring seamless operation without the constant need to check on it manually.

The ice produced is bullet-shaped, which is not only aesthetically pleasing but also ideal for cooling beverages quickly without diluting them too rapidly. This type of ice is especially popular in bars and restaurants as it offers both functionality and visual appeal.

Maintenance is straightforward with this model, as it includes a removable ice bucket and a drain plug for easy cleaning. Regular maintenance ensures that the ice maker continues to operate efficiently and remains hygienic for food and drink preparation.

Overall, the Avanti IM15SS is an impressive unit for those seeking a reliable, efficient, and stylish ice maker. Its combination of production capacity, modern design, advanced technology, and user-friendly features makes it a top choice for ice production in various settings. Whether for personal or light commercial use, it's sure to meet the ice-making needs of any customer.