Listen Technologies AO 6004 user manual Analogue Section, General, Connectors

Page 13

Danish Interpretation Systems

User Manual

Technical specifications

Digital Section

Remote Control commands in/out

Sound quality ......... 20 bit audio @ 32 kHz sampling frequency

Analogue Section

Output signal type

ground lifting transformer balanced

Nominal output level:

0 dBm at nominal input

Max. Output level:

15 dBm

Frequency response

50-15kHz

Signal to noise ratio:

>85 dBA

Total harmonic distortion:

< 0.1%

By using SW 6000 the user can control the AO 6004 through the CU 6005/6010.

The CU 6005/6010 can read/control the following settings:

*

Channel number for each output channel

*

Volume setting for each channel

The settings can only be read/controlled from the SW 6000.

The CU 6005/6010 continuously monitors the status of the AO 6004 to ensure that updated status of the unit is always present on the CU 6005/6010.

General

Power requirement

24-48 V DC

Power consumption

2W maximum

Power supplied from

Specifications are subject to change without notice.

...................................

CU 6005 / CU 6010 / EX 6010 / PS 6000

Temperature to guarantee specified performance

..............................5 Deg C. to 40 Deg C. (35 to 80% humidity)

Storage temperature

.......................... -20 Deg C. to 60 Deg C. (10 to 80% humidity)

Weight

0.84 kg

Dimensions (W x H x D)

180 (205) x 38 x 120 (120) mm

Dimensions in bracket are including brackets

Accessories supplied

User manual

Connectors

DCS-LAN network

2 pieces RJ45

Analogue outputs connectors

4 - XLR3 male connectors

Manual 01 18 04442

13

 

Image 13
Contents Danish Interpretation Systems Digital Conference SystemDanish Interpretation Systems List of Contents Cleaning Installation precautionsWarranty CompliancyDescription of the DCS 6000 system FeaturesCentral equipment etc System componentsInterpreter equipment Voting equipmentOperating instructions FeaturesAO 6004 Audio Output Unit General descriptionFront plate connectors Front plate controls and indicatorsSystem settings Pre-configured settings SW6000 settingsNormal operation Powering up General guidelines System SetupUsing AO 6004 with IT 6108 IR-Transmitter Typical schematicsUsing AO 6004 with DT 60xx Digital IR-Transmitter Appendix Accessories not suppliedTechnical appendix CablingAnalogue Section ConnectorsGeneral Danish Interpretation Systems