Danish Interpretation Systems | User Manual |
User controls, indications & connections
Front plate layout
The front plate layout of the AO 6004 Audio Output Unit consists of 4 XLR analogue transformer balanced outputs and 2
Front plate controls and indicators
The AO 6004 is an easy to use AO unit with pre- configured settings and no user interface in terms of controls, display or indicators.
Front plate connectors
Audio Output A to D
On the front are located 4 XLR 3P connectors, each supplying transformer balanced audio signal from each of the 4 channels.
The outputs can be used for tape recording purpose i.e. or for connecting a digital infrared transmitter like DT 6008, DT 6032 or analogue infrared transmitter IT6108 for wireless transmission of the interpreted languages.
Two RJ45 sockets are located at the front of the unit for connecting to the previous unit like the CU 6005/6010 Central Unit or any other unit with a DCS LAN connector and to the next unit like an IS 6132 Interpreter set, CS 6032 Channel Selector, DM/CM 6xxx Conference Unit.
System settings
Pre-configured settings
The AO 6004 comes with
The AO 6004 automatically assigns channels to the outputs at
The output volume for each channel is +3 dB, which is the recommended level for connecting to DT 60xx.
The unit can be
SW6000 settings
The SW6000 can be used for changing the assignment of channels to outputs and for setting the volume.
Both the Conference Administration Application (CAA) and the Conference User Application (CUA) can be used to configure the AO units connected. They both have settings for assigning channels to each of the 4 outputs
8 | Manual 01 18 04442 |
|