Avanti CB350S Problems with Your APPLIANCE?, Troubleshooting Guide, Problem Possible Cause

Page 14

•Unlock the dispensing head from the keg by pushing the catch and remove the piercing pin from the keg.

b) To clean the beer lines

•Fill the cleaning bottle supplied with your appliance half-way with lukewarm water. As required, you may add a bit of detergent. Push it firmly onto the dispensing kit.

•Reconnect the hoses on the dispensing kit as indicated in section "Setting up the keg".

•Open the valve of the pressure gauge and set the pressure to 1.0 bar for 5 seconds and then close the valve again immediately.

•Pull the tap handle towards you and allow the cleaning solution to flow completely.

•Once you have completely finished all of the cleaning solution, rinse the appliance using the same method but with clean water.

•Pull on the tap handle to empty the cleaning bottle and release the remaining gas.

•The various Party Pub accessories are not designed to be washed in a dishwasher.

c) To clean the Party Pub exterior surfaces.

•Before cleaning the appliance, it is essential to turn off the main switch and then pull the plug out of the socket.

•The drip tray and cover can be removed from the unit either separately or together by pulling it away from the unit. After cleaning the tray and cover can be returned to place in the reverse manner.

CAUTION

Failure to unplug the Party Pub could result in electrical shock or personal injury.

Storage

When the appliance is not used for a long period of time. Store the appliance in a dry place out of children’s reach.

PROBLEMS WITH YOUR APPLIANCE?

You can solve many common unit problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer.

 

TROUBLESHOOTING GUIDE

PROBLEM

 

POSSIBLE CAUSE

Unit does not operate.

 

Unit is not plugged in.

 

 

The circuit breaker tripped or a blown fuse.

Unit is not cold enough.

 

Check the temperature control setting.

 

 

External environment may require a higher

 

 

setting.

 

 

The door is opened too often.

 

 

The door is not closed completely.

 

 

The door gasket does not seal properly.

 

 

The unit does not have the correct clearances.

 

 

Abnormal voltage.

Vibrations.

 

Check to assure that the unit is level.

The light does not work.

 

Not plugged in.

 

 

The circuit breaker tripped or a blown fuse.

 

 

The light button is “OFF”.

 

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Beer Dispenser Dispensador DE Cerveza Model Number / No. de ModeloTable of Contents WARNING Appliance SafetyYour safety and the safety of others are very important Important Safeguides Help US Help YOU Avanti Customer ServiceIf YOU Need Service Read this guide carefullyParts & Features Installation Instructions  Before Using Your ApplianceWarning  Extension Cord Installation of Your Appliance Preparing the kegKeg with vent plug Keg with rubber plugKeg with combined plug Other types of kegsPiercing pin Setting up the kegSetting up the gas cartridge Adjusting the gas pressure Beer type CO2 content in % Pressure in bar approx CCare and Maintenance Operating Your Party PUBProblem Possible Cause Problems with Your APPLIANCE?Troubleshooting Guide Flat Beer Draught Beer Trouble GuideCloudy Beer Loose Foam CausesWild Beer Service under warranty Fifth Year WarrantyWhat is not Covered Staple your sales receipt here. ProofService for Your Appliance Avanti Products Customer ServicesSeguridad Instrucciones DE SeguridadAdvertencia Guias DE Seguridad PeligroConexión Electrica Advertencia Importante InstalacionII. Preparando EL KEG Barril III. Colocando EL BarrilAjustando LA Temperatura Colocando EL Cilindro DE GASAjustando LA Presion DEL GAS VII Dispensando LA CervezaIX. Almacenaje Problemas ComunesGuia Para Solucion DE Problemas Problemas CON LA Cerveza Cerveza Turbia Cerveza SIN CuerpoEspuma Suelta Cerveza CON Demasiada EspumaHow Did You Learn About This Product  Promote better productsIs This Product Used Ver 1

CB350S specifications

The Avanti CB350S is a notable entry in the modern motorcycle market, designed to capture the essence of classic styling while integrating contemporary performance features. As a part of Avanti's line-up, the CB350S is aimed at riders seeking a balance of heritage aesthetics and cutting-edge technology.

One of the most striking features of the Avanti CB350S is its retro-inspired design, which draws heavily from classic motorcycles. Its rounded headlamp, sculpted fuel tank, and vintage tank badges resonate with nostalgia, appealing to enthusiasts of classic motorcycling while ensuring modern functionality. The overall silhouette is sleek and sophisticated, making the motorcycle easily recognizable.

At the heart of the CB350S is a powerful, air-cooled, single-cylinder engine. This 348cc unit delivers a satisfactory balance of performance and efficiency, producing smooth power delivery suitable for both city commuting and open highway rides. The engine is mated to a 5-speed transmission, providing the right gearing options for varied riding conditions. This combination makes the bike not only fun to ride but also efficient for longer journeys.

The Avanti CB350S incorporates advanced technologies to enhance the riding experience further. The motorcycle features a modern digital-analog instrument cluster that provides essential information at a glance, including speed, fuel level, and trip information. Additionally, the bike is equipped with an LED lighting system for improved visibility and safety during nighttime rides.

Suspension plays a crucial role in any motorcycle's performance, and the CB350S does not disappoint. It boasts a telescopic front fork and dual shock absorbers at the rear, ensuring a comfortable ride even on bumpy terrain. The bike’s braking system consists of disc brakes both at the front and rear, coupled with optional ABS, enhancing stopping power and control.

When it comes to comfort, the CB350S features a well-padded seat that can accommodate both the rider and a passenger comfortably, making it ideal for longer rides. The riding ergonomics are designed to be user-friendly, providing a natural riding position that enhances comfort during extended periods on the road.

In conclusion, the Avanti CB350S stands out for its blend of classic design, modern technology, and reliable performance. Whether you're an experienced rider or just starting your motorcycle journey, the CB350S offers a unique riding experience that's both engaging and practical, making it a worthy contender in today’s motorcycle landscape.
Top Page Image Contents