Kramer Electronics SPK-C613 user manual Using the Suspended Ceiling Speaker Mounting Kit Optional

Page 12

3.Adjust each speaker to the appropriate tap setting before installing the grille

(see Figure 4).

Set the tap according to the power requirements of the speaker based on its location in the room (for example, a speaker located in a remote corner would require additional power)

Figure 4: Adjust Tap Selector

!For 100V installations, DO NOT set the tapping switch beyond 30W. Doing so may cause damage to both the speaker and the amplifier.

4.Insert the supplied screws into the screw openings from the front of the speakers.

5.Connect the speaker wires to the speaker terminals.

6.Insert the speaker into the opening and tighten the screws.

When tightening the screws, the tabs automatically turn outward, thus clamping the speaker to the wall from its rear side.

iDo not over-tighten the screws. It may cause damage to both the speakers and the surface.

7.Push the grille firmly into the slot in the speaker baffle.

5.3.1Using the Suspended Ceiling Speaker Mounting Kit (Optional)

To install the Open-back ceiling speakers using the mounting kit, do the following:

1.Place the C-ring over the hole cut in the ceiling tile (on the “ceiling” side). Place it around the hole so that the tabs are located in parallel to the tile edges (see Figure 5).

8

SPK-C613 - Installing the Open-back Ceiling Speakers

Page 11 Page 13
Image 12
Page 11 Page 13
Contents SPK-C613 This page is intentionally left blank Figures This page is intentionally left blank Introduction Getting Started Achieving the Best PerformanceOpen-back Ceiling Speakers in a Boardroom Setup OverviewYour SPK-C613 Defines the SPK-C613Description Installing the Open-back Ceiling Speakers Choosing the Best LocationCutting the Ceiling Tile Mounting the Open Back Ceiling Speakers Position Mounting TabUsing the Suspended Ceiling Speaker Mounting Kit Optional Array Installation Installing the Open-back Ceiling SpeakersSpeaker Coverage Area Square Layout Parallel Wiring Painting the Speaker Technical Specifications Audio and PowerThis page is intentionally left blank Page Safety Warning

SPK-C613 specifications

Kramer Electronics has long been a recognized leader in the field of audio-visual technology, and one of its remarkable offerings is the SPK-C613 speaker. The SPK-C613 is crafted to meet the needs of various installations, providing high-quality audio performance in a compact and versatile design.

At the heart of the SPK-C613 is its impressive audio performance, catering to a variety of environments such as conference rooms, classrooms, and outdoor venues. With a power rating of 30 watts RMS and the ability to handle peaks up to 120 watts, it can fill a room with rich, clear sound that engages and captivates listeners. The speaker is equipped with a six-inch woofer and a one-inch tweeter, ensuring a balanced audio output that enhances both low and high frequencies.

One of the standout features of the SPK-C613 is its flexible mounting options. It can be easily installed in various orientations, making it ideal for wall or ceiling mounting. This flexibility allows for optimal sound distribution, helping to eliminate sound dead spots in larger venues. The sleek and modern design of the speaker also complements any interior décor, making it an aesthetically pleasing choice for installation in sensitive environments.

The SPK-C613 is also designed with technology in mind. It supports both low-impedance and high-impedance setups, making it compatible with a wide range of amplifiers and audio systems. The built-in transformer allows for a straightforward installation in professional sound setups, particularly where multiple speakers may be required. With its nominal impedance of 8 ohms, it remains efficient when connected to different amplifiers.

In addition to its outstanding sound quality and versatility, the SPK-C613 is built to last. The durable construction ensures reliability, even in high-demand applications. It is designed to perform well under various environmental conditions, which makes it suitable for both indoor and outdoor use.

Overall, the Kramer Electronics SPK-C613 is an excellent choice for those seeking a high-performance speaker that combines flexibility, durability, and superior audio quality. Its features and technologies make it an attractive option for diverse applications, providing a complete audio solution that enhances communication and engagement in any setting. Whether utilized in commercial installations or home theaters, the SPK-C613 stands out as a powerful and versatile audio component.
Top Page Image Contents