Kramer Electronics SPK-C613 Array Installation, Installing the Open-back Ceiling Speakers

Page 13

T-channel Grid

C-ring

Support Ring

Tile Rails

Screws

 

Ceiling Tile

 

Figure 5: Installing the Open-back Ceiling Speakers

 

2.Place the tile rails on the tile and snap them into the two tabs on the C-ring. Align the rails so that the ends extend over the T-channel grid.

3.Insert a screw through each tab on the C-ring to secure the rails.

4.Connect the speaker wires to the speaker terminals.

5.Insert the speaker into the opening and tighten the screws.

When tightening the screws, the tabs automatically turn outward, thus clamping the speaker to the wall from its rear side.

iDo not over-tighten the screws. It may cause damage to both the speakers and the surface.

6.Push the grille firmly into the slot in the speaker baffle.

Check that the grille is securely seated.

To remove the grille, insert two bent paper clips into the holes in the grille and carefully pull it down. Repeat this around the perimeter of the grille until it is completely removed

5.4Array Installation

When installing SPK-C613in an array installation layout, you have to define the distance between speakers as well as the layout pattern (square or hexagonal). The distance between speakers is set according to the speakers’ dispersion angle (see Figure 6), the uniformity of the coverage desired and the budget.

SPK-C613 - Installing the Open-back Ceiling Speakers

9

Page 12 Page 14
Image 13
Page 12 Page 14
Contents SPK-C613 This page is intentionally left blank Figures This page is intentionally left blank Introduction Achieving the Best Performance Getting StartedOverview Open-back Ceiling Speakers in a Boardroom SetupDefines the SPK-C613 Your SPK-C613Description Choosing the Best Location Installing the Open-back Ceiling SpeakersCutting the Ceiling Tile Position Mounting Tab Mounting the Open Back Ceiling SpeakersUsing the Suspended Ceiling Speaker Mounting Kit Optional Installing the Open-back Ceiling Speakers Array InstallationSpeaker Coverage Area Square Layout Parallel Wiring Painting the Speaker Audio and Power Technical SpecificationsThis page is intentionally left blank Page Safety Warning

SPK-C613 specifications

Kramer Electronics has long been a recognized leader in the field of audio-visual technology, and one of its remarkable offerings is the SPK-C613 speaker. The SPK-C613 is crafted to meet the needs of various installations, providing high-quality audio performance in a compact and versatile design.

At the heart of the SPK-C613 is its impressive audio performance, catering to a variety of environments such as conference rooms, classrooms, and outdoor venues. With a power rating of 30 watts RMS and the ability to handle peaks up to 120 watts, it can fill a room with rich, clear sound that engages and captivates listeners. The speaker is equipped with a six-inch woofer and a one-inch tweeter, ensuring a balanced audio output that enhances both low and high frequencies.

One of the standout features of the SPK-C613 is its flexible mounting options. It can be easily installed in various orientations, making it ideal for wall or ceiling mounting. This flexibility allows for optimal sound distribution, helping to eliminate sound dead spots in larger venues. The sleek and modern design of the speaker also complements any interior décor, making it an aesthetically pleasing choice for installation in sensitive environments.

The SPK-C613 is also designed with technology in mind. It supports both low-impedance and high-impedance setups, making it compatible with a wide range of amplifiers and audio systems. The built-in transformer allows for a straightforward installation in professional sound setups, particularly where multiple speakers may be required. With its nominal impedance of 8 ohms, it remains efficient when connected to different amplifiers.

In addition to its outstanding sound quality and versatility, the SPK-C613 is built to last. The durable construction ensures reliability, even in high-demand applications. It is designed to perform well under various environmental conditions, which makes it suitable for both indoor and outdoor use.

Overall, the Kramer Electronics SPK-C613 is an excellent choice for those seeking a high-performance speaker that combines flexibility, durability, and superior audio quality. Its features and technologies make it an attractive option for diverse applications, providing a complete audio solution that enhances communication and engagement in any setting. Whether utilized in commercial installations or home theaters, the SPK-C613 stands out as a powerful and versatile audio component.
Top Page Image Contents