English
Our products are engineered to meet the highest standards of quality, functionality and design. We hope you thoroughly enjoy your new Braun appliance.
Caution
Please read the use instructions carefully and completely before using the appliance.
•The blades are very sharp!
•Keep the appliance out of reach of children.
•The appliance is constructed to process normal household quantities.
•Always unplug the appliance when it is left unattended and before assembling, disas- sembling, cleaning or storing.
•Before operating, check whether your voltage corresponds to the voltage printed on the bottom of the appliance.
•Especially when operating the handblender attachment in hot liquids, do not immerse the blender shaft into – or remove it from the liquid while the appliance is switched on.
•Do not hold the motor part !, nor the whisk gearbox Ë under running water, nor immerse them in water.
•The beaker Á is not
•Before operating the food preparation attachment Í, make sure that the lid interlock (2c) is properly clicked in and that the pusher (1) is in place.
•Do not insert other tools than the pusher (1) into the filling tube during processing.
•Always switch off the appliance before removing the lid (2).
•The lid (2) can be cleaned under running water, but do not immerse it in water, nor clean it in a dishwasher.
•The bowl (4) is not
•Braun electric appliances meet applicable safety standards. Repairs or the replace- ment of the mains cord must only be done by authorised service personnel. Faulty, unqualified repair work may cause con- siderable hazards to the user.
and baby food as well as for mixing drinks and milkshakes:
1.Insert the motor part ! into the blender shaft & until it locks.
2.Introduce the handblender vertically into the vessel, then press switch ‚ or turbo switch „.
3.To release the blender shaft after use, press buttons ‰ and pull it off.
You can operate the handblender in the measuring beaker Á, and just as well in any other vessel. When blending directly in the saucepan while cooking, take the pan from the stove first to protect the appliance from overheating.
How to operate your whisk
Use the whisk only for whipping cream, beating egg whites and mixing sponges and
1.Insert the whisk È into the whisk gearbox Ë, then insert the motor part ! into the gearbox until it locks.
2.Place the whisk in a vessel and only then, press switch ‚ to operate it.
3.To release, press buttons ‰ and pull off the gearbox. Then pull the whisk out of the gearbox.
For best results ...
•use a wide bowl rather than the beaker
•move the whisk clockwise, holding it slightly inclined
Whipped cream:
Only whip up to 400 ml chilled cream (min. 30 % fat content, 4 – 8 °C).
Start with a low speed setting «1» and while whipping, increase the speed to setting «12».
Egg snow:
Only whip up to 4 egg whites.
Start with a medium speed setting «7» and while beating, increase the speed to setting «12».
Description
!Motor part
‚On/off switch for variable speed
# Turbo switch $ Release buttons
% Variable speed regulator & Blender shaft
Á Measuring beaker Ë Whisk gearbox È Whisk
Í Food preparation (FP) attachment
Setting the speed
When activating switch ‚, the processing speed corresponds to the setting of the variable speed regulator %. The higher the speed setting, the faster and finer the chopping results will be.
For maximum processing speed, press the turbo switch #. You may also use the turbo switch for instant powerful pulses without having to manipulate the speed regulator.
Depending on your application, we recom- mend the following speed settings:
Handblender | 1... turbo |
Whisk | 3... 12 |
Food preparation |
|
attachment | see speed tables in |
| picture sections A and B |
How to operate your handblender
The handblender is perfectly suited for preparing dips, sauces, soups, mayonnaise
How to operate your food preparation (FP) attachment
1Pusher
2Lid
2a Coupling for motor part
2b Filling tube
2c Lid interlock
3Blade
4Bowl
5
6Tool holder
6a Slicing tools (fine, coarse)
6b Shredding tools (fine, coarse)
Chopping
(see picture section A with processing table i)
The blade (3) is perfectly suited for chopping meat, cheese, onions, herbs, garlic, carrots, walnuts, hazelnuts, almonds etc.
For chopping hard goods, use the turbo switch „.
N.B.: Do not chop extremely hard food, such as nutmeg, coffee beans and grains.
Before chopping ...
•
•remove stalks from herbs,
•remove bones, tendons and gristle from meet.
For best results, please refer to the speed settings recommended in the processing table.
5