Bloomfield 8742 owner manual Warranty Statement

Page 2

WARRANTY STATEMENT

All electrical equipment manufactured by BLOOMFIELD INDUSTRIES is warranted against defects in materials and workmanship for a period of one year from the date of original installation or eighteen (18) months from the date of shipment from our factory, whichever comes first, and is for the benefit of the original purchaser, except that:

a.airpots carry a 30 day parts warranty only.

b.dispensers; i.e., tea and coffee carry a 90 days parts warranty only, excludes decanters.

THE FOREGOING OBLIGATION IS EXPRESSLY GIVEN IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY EXCLUDED.

BLOOMFIELD INDUSTRIES DIVISION / SPECIALTY EQUIPMENT MANUFACTURING CORPORATION SHALL NOT BE LIABLE FOR INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES FROM ANY CAUSE WHATSOEVER.

This warranty is void if it is determined that upon inspection by an Authorized Service Agency that the equipment has been modified, misused, misapplied, improperly installed, or damaged in transit or by fire, flood or act of God.

It also does not apply if the serial nameplate has been removed or unauthorized service personnel perform service. The prices charged by Bloomfield Industries for its products are based upon the limitations in this warranty. Seller’s obligation under this warranty is limited to the repair of defects without charge by a Bloomfield Industries Authorized Service Agency or one of its sub-agencies. This service will be provided on customer’s premises for non-portable models. Portable models (a device with a cord and plug) must be taken or shipped to the closest Authorized Service Agency, transportation charges prepaid, for services.

In addition to restrictions contained in this warranty, specific limitations are shown below (Additional Warranty Exclusions). Bloomfield Industries Authorized Service Agencies are located in principal cities.

This warranty is valid in the United States and void elsewhere. Please consult your classified telephone directory or your food service equipment dealer; or, for information and other details concerning warranty, write to:

Service Parts Department

Bloomfield Industries

P.O. Box 280

Verdi, NV 89439

Phone: (888) 492-2782

Fax: (888) 492-2783

SERVICE POLICY AND PROCEDURE GUIDE ADDITIONAL WARRANTY EXCLUSIONS

1.Resetting of safety thermostats, circuit breakers, overload protectors, or fuse replacements unless warranted conditions are the cause.

2.All problems due to operation at voltages other than specified on equipment nameplates; conversion to correct voltage must be the customer’s responsibility.

3.All problems due to electrical connections not made in accordance with electrical code requirements and wiring diagrams supplied with the equipment.

4.Replacement of items subject to normal wear, to include such items as knobs and light bulbs. Normal maintenance functions including adjustment of thermostats, microswitches, and replacement of fuses and indicating lights are not covered under warranty.

5.All problems due to inadequate water supply, such as fluctuating, or high or low water pressure.

6.All problems due to mineral/calcium deposits, or contamination from chlorides/chlorines. De-liming is considered a preventative maintenance function and is not covered by warranty.

7.Full use, care and maintenance instructions are supplied with each machine. Those miscellaneous adjustments noted are customer responsibility. Proper attention will prolong the life of the machine.

8.Travel mileage is limited to sixty (60) miles from an authorized Service Agency or one of its sub-agencies.

9.All labor shall be performed during normal working hours. Overtime premium shall be charged to the customer.

10.All genuine Bloomfield replacement parts are warranted for ninety (90) days from date of purchase on non- warranted equipment. Any use of non-genuine Bloomfield parts completely voids any warranty.

11.Installation, labor and job check-out are not considered warranty.

12.Charges incurred by delays, waiting time or operating restrictions that hinder the service technicians ability to perform services are not covered by warranty. This includes institutional and correctional facilities.

for 8742-8748 Tea Brewer 76116

SHIPPING DAMAGE CLAIMS PROCEDURE

Manual

NOTE: For your protection, please note that equipment in this shipment was carefully inspected and packaged by skilled personnel before leaving the factory.

Upon acceptance of this shipment, the transportation company assumes full responsibility for its safe delivery.

IF SHIPMENT ARRIVES DAMAGED:

1.VISIBLE LOSS OR DAMAGE: Be certain that any visible loss or damage is noted on the freight bill or express receipt, and that the note of loss or damage is signed by the delivery person.

2.FILE CLAIM FOR DAMAGE IMMEDIATELY: Regardless of the extent of the damage.

3.CONCEALED LOSS OR DAMAGE: if damage is unnoticed until the merchandise is unpacked, notify the transportation company or carrier immediately, and file “CONCEALED DAMAGE” claim with them. This must be done within fifteen (15) days from the date the delivery was made to you. Be sure to retain the container for inspection.

Bloomfield Industries cannot assume liability for damage or loss incurred in transit. We will, however, at your request, supply you with the necessary documents to support your claim.

606 Owners

xi

Image 2
Contents 606 Warranty Statement Applicability Table of ContentsSpecifications Features and Operating Controls Precautions and General Information Agency Listing InformationLeveling the Unit InstallationPLUMBER’S Installation Instructions Installation ELECTRICIAN’S Installation InstructionsOperation START-UPWater Heater Automatic OperationBrewing TEA PreparationProcedure Clean Tea Brewer Cleaning InstructionsTroubleshooting Suggestions Symptom Possible Cause Suggested RemedyRear Panel Access Panels TOP PanelServicing Instructions Temperature Adjustment Servicing InstructionsReplace Thermostat Solenoid Time AdjustmentRemove Tank Cover Assembly Replace Heating Element Replace Timer AssemblyClean Strainer Screen Replace SolenoidProcedure Delime the Water Tank 8742 8748 Exploded View & Parts List 8742 8748 Exploded View & Parts List 8742 8748 Service Kits 8742 8748 Wiring Diagram Telephone Fax

8742 specifications

Bloomfield 8742 is a cutting-edge platform designed to leverage the latest technologies in the field of data processing and management. This innovative system has been engineered to support a wide range of applications, making it a versatile solution for organizations seeking to enhance their data-driven decision-making capabilities.

One of the main features of Bloomfield 8742 is its robust architecture, which is capable of handling large volumes of data with impressive speed and efficiency. The platform employs distributed computing technology, allowing it to process data in parallel across numerous nodes. This not only accelerates processing times but also enhances the system’s scalability, enabling businesses to easily adjust their resources to meet growing demands.

Another standout characteristic of Bloomfield 8742 is its advanced data analytics capabilities. With built-in machine learning algorithms, users can extract valuable insights from their data without requiring extensive programming knowledge. The platform’s intuitive user interface simplifies the process of building and deploying models, fostering a more collaborative environment for data scientists and non-technical stakeholders alike.

Additionally, Bloomfield 8742 places a strong emphasis on data security. It incorporates state-of-the-art encryption protocols to ensure that sensitive information is protected at all times. Moreover, the system supports role-based access controls, enabling organizations to manage user permissions effectively and safeguard their data against unauthorized access.

The integration capabilities of Bloomfield 8742 are also noteworthy. It allows seamless connectivity with various external systems and applications, making it easy for organizations to enhance their existing workflows. Whether it’s connecting to an enterprise resource planning (ERP) system or integrating with cloud storage solutions, Bloomfield 8742 provides the tools necessary to create a cohesive data ecosystem.

In summary, Bloomfield 8742 stands out in the realm of data management solutions due to its powerful architecture, advanced analytics features, robust security measures, and seamless integration capabilities. As organizations increasingly rely on data to drive their strategies, Bloomfield 8742 proves to be an essential tool that meets the evolving needs of modern businesses, empowering them to turn data into actionable insights.