Bloomfield 1082, 1086 Quality Timer, After Hours Operation, Disable/Enable After Hours Feature

Page 11

OPERATION (continued)

642 75872 Owners Manual E.B.C. Airpot /Thermal

Quality Timer

Coffee looses its freshness as it sits on a warmer. The Quality Timer flashes the warmer lights 30 minutes after the last brew to remind you that the coffee is nearing the end of its useful life.

After Hours™ Operation

During normal operation, the controller will maintain the precise brewing temperature. If, however, if the BREW key in not pressed for

3 hours, the brewer goes into After Hours™ mode; any warmer left on will be turned off; and, the temperature will only be maintained to within 20ºF. This feature prolongs component life and saves energy.

As soon as the BREW key is pressed, the brewer returns to normal operation, heating the water to the precise temperature before beginning the brew. The brewer will return to After Hours™ mode only if three hours pass without a brew being initiated.

Disable/Enable After Hours™ Feature

To disable After Hours™, press the ON/OFF key to turn the brewer OFF. Press and hold the CANCEL key until two beeps sound, and the HEAT indicator flashes twice. This feature is now disabled.

To re-enable After Hours™, press the ON/OFF key to turn the brewer OFF. Press and hold the CANCEL key until three beeps sound, and the POWER indicator flashes twice. This feature is now enabled, however, it will not be activated unless no brew is initiated for three hours.

Over-Temperature and Temperature Fault Protection

Should the water temperature exceed 214ºF (101ºC), or if the controller does not detect a 2ºF (1ºC) rise in temperature within four minutes of calling for heat, the brewer will go into Over Temperature Mode; the heating element is turned off, all warmers are disabled and all lights will flash.

Possible causes of Over Temperature condition:

•Setpoint is in the boiling range.

•Heating element or temperature probe has malfunctioned.

•Excessive scale buildup is preventing the element from heating the water.

•Heating element relay fails in the “on” state.

•No water in the tank.

•Hi-limit safety tripped (must be manually reset)

To reset the brewer:

•Determine the cause of the failure and take appropriate remedial action to rectify the problem.

•Press and hold the CANCEL key for three seconds. Four beeps will sound and the brewer will resume normal operation.

Quality Timer is normally set for 30 minutes. It can be set for 20 minutes by moving a jumper on the controller. See page 19.

After Hours™ is an energy saving feature. The brewer will enter After Hours™ mode if it is not used for three hours. Press the BREW key to immediately return the brewer to normal operation.

IMPORTANT:

If the original cause of the problem has not been addressed, the brewer will once again go into Over Temperature mode four minutes after being reset.

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Electronic Brew Control Warranty Statement Applicability Table of ContentsFeatures and Operating Controls Burn Hazard Precautions and General InformationAgency Listing Information Electrical DamageLeveling the Unit Installation InstructionsPLUMBER’S Installation Instructions Equipment HazardELECTRICIAN’S Installation Instructions Installation InstructionsSTART-UP OperationWater Heater Energizing the Brewer Electronic FeaturesBrew Settings Brew CancelAfter Hours Operation Quality TimerDisable/Enable After Hours Feature Over-Temperature and Temperature Fault ProtectionAutomatic Operation be sure Heat light is not lit Brewing CoffeePreparation POUR-OVER OperationElectric Shock Hazard Cleaning InstructionsSymptom Possible Cause Suggested Remedy Troubleshooting SuggestionsWhat to Check Description Corrective Action Error DetectionElectric Shock Hazard Servicing Instructions Access PanelsServicing Instructions Temperature AdjustmentReplace Temperature Probe Brew Time AdjustmentDripout Time Adjustment Remove Tank LID AssemblyRepair HOT Water Faucet Replace SolenoidReplace Faucet Supply Hose Replace HOT Water Faucet CoilReplace Controller Reset HI-LIMIT Models 1086Replace Keypad Replace Power BoardSET Controller Jumpers Procedure Delime the Water Tank Servicing Instructions HOT Water Tank Assembly Exploded View & Parts ListElectrical Components Exploded View & Parts List642 Internal Plumbing ComponentsCabinet Components C. Brewer Wiring DiagramWiring Diagram Telephone Fax

1088, 1082XL, 1080, 1082, 1086 specifications

Bloomfield is renowned for its reliable and innovative coffee brewing equipment, providing seamless solutions for cafes and restaurants worldwide. Among their distinguished product lineup are the Bloomfield 1088, 1082XL, 1080, 1086, and 1082 models, each designed to meet the diverse needs of coffee enthusiasts and professional baristas alike.

The Bloomfield 1088 is celebrated for its high-volume brewing capabilities, making it ideal for busy coffee shops. Equipped with a stainless steel construction, it ensures durability and longevity. The intuitive controls allow users to adjust brew times and temperatures, optimizing the brewing process for various coffee types. With a capacity to brew 12 gallons per hour, it is well-suited for peak service times. Additionally, it features an automatic shut-off system, promoting safety and energy efficiency.

Moving to the Bloomfield 1082XL, this model takes brewing efficiency to the next level. Enhanced with an expanded brew capacity, it incorporates a digital display that provides real-time feedback on brewing status. This model also supports pre-infusion features, allowing water saturation prior to brewing, leading to enriched flavors and aromas. The 1082XL's advanced thermal carafe also maintains temperature longer, ensuring coffee stays hot for an extended period.

The Bloomfield 1080 stands out for its simplicity and straightforward operation. Designed with reliability in mind, it offers a solid brewing solution for establishments that prioritize efficiency. Its water temperature control is essential for extracting the perfect cup of coffee. While compact, this model does not compromise on quality, making it a favorite among smaller coffee outlets.

The Bloomfield 1086, featuring a unique dual brewer system, is excellent for those requiring flexibility in their brewing. This model allows the simultaneous brewing of different coffee varieties, catering to diverse customer preferences. With programmable settings, the 1086 also enables baristas to replicate signature brews consistently. The durable construction ensures that it can withstand the rigors of a bustling cafe environment.

Lastly, the Bloomfield 1082 is noted for its adaptability and user-friendly interface. Its robust design includes multiple brewing options, enabling operators to experiment with various coffee beans and brewing methods. The model emphasizes thermal efficiency, thanks to its advanced heat retention technologies, ensuring each cup of coffee is served at the optimal temperature.

In conclusion, the Bloomfield series of coffee brewers distinguishes itself through innovative features, user-friendly technologies, and a commitment to quality. Each model serves a unique segment of the market, satisfying the needs of both high-volume and small scale operations. Their dedication to craftsmanship and performance makes Bloomfield a preferred choice for coffee professionals seeking reliability and excellence.
Top Page Image Contents