Listen Technologies user manual Strategies for Maximizing RF Reception with the LR-100

Page 8

LR-100 Stationary Receiver / Power Amplifier

R

www.ListenTech.com

Long cable runs can result in signal degradation due to “loss” characteristics of the cable. At 72 MHz, there is a loss of 2dB per 100 feet of cable and at 216 MHz, there is a loss of 5 dB per 100 feet of cable. (A 3dB loss means half of your power has been lost.) However, it is better to suffer coaxial power loss than to try to shoot your signal through obstacles! Obstacles, especially metal, can create drop-outs or reflections of your signal that will result in poor listening conditions.

Strategies for Maximizing RF Reception with the LR-100

For proper and dependable operation, the LR-100 should receive a strong and consistent signal from the originating transmitter. The following strategies should be used maximize this signal:

a.When designing and installing your system, keep in mind that the location of both the transmitting and receiving antennas is critical to maximizing signal strength.

b.Eliminate or minimize obstructions between the transmitting antenna and the receiv- ing antenna.

c.Minimize the distance between the transmitting and receiving antennas.

d.Move transmitting and receiving antennas away from metal objects.

e.For the LR-100, consider using a remote antenna instead of the supplied 90-degree helical antenna. This will allow you to place the antenna at a location with improved line of site to the transmitting antenna. (You will need to be careful about the type and length of coaxial cable; see the note above.)

f.Place the transmitting antenna as high as possible.

g.Orient both transmitting and receiving antennas vertically.

h.For 216MHz unit only, consider using a gain antenna such as a Yagi type antenna.

CAUTION: When installing antennas, ensure the antenna is clear of power lines.

NOTES: If the RF signal to the LR-100 is too high, the audio will be distorted. This may happen if you are within 40 feet of the LT-800 transmitter. Consider reducing the output power of the transmitter or optionally removing the antenna on the LR-100 (there is sufficient internal antenna inside the LR-100 to receive an adequate signal from the transmitter).

Coaxial cable, connectors, and optional antenna mounting kits are available from Listen. Visit our website for details.

LISTEN TECHNOLOGIES CORPORATION 8535 South 700 West, Suite A Sandy, Utah 84070-2515 USA

8

Phone: +1.801.233.8992 U.S.A. Toll Free: 1.800.330.0891 Fax: +1.801.233.8995 www.ListenTech.com

 

 

 

Image 8
Contents User’s Manual LR-100 Stationary Receiver / Power Amplifier Table of Contents SpecificationsLR-100 Front Panel Connections and Controls MuteLR-100 Rear Panel Connections and Controls ControlSystem Block Diagram Before Installing Your LR-100Important Things to Note Before Starting Your Installation What is Squelch?What is ListenSQTM? Coaxial CableStrategies for Maximizing RF Reception with the LR-100 Battery Operation InstallationPowering the Unit AC Power Operation Installation Audio Connections Output Audio Output Audio Selection SwitchUnbalanced Audio Output LINE/MIC SwitchBalanced Audio Output Auxiliary Input Speaker ConnectionUsing a remote antenna Installation AntennaUsing the supplied helical antenna Installation Remote Control Which channels should I use? SetupUnderstanding the LCD display Input Audio Levels Setup AdjustmentsSetup VU Meter Selecting SQ on or OFF Channel SelectionProgramming SquelchLR-100 Stationary Receiver / Power Amplifier Resetting After an Overload Condition Troubleshooting LR-100 Stationary Receiver / Power Amplifier Channel Selection Chart 72 MHz 216 MHz FCC Statement Warranty

LR-100 specifications

The Listen Technologies LR-100 is an advanced personal listening device designed to enhance audio experiences in various settings, including classrooms, churches, theaters, and conference rooms. With its sophisticated technology and numerous features, the LR-100 ensures that users can hear every word clearly, allowing them to participate more fully in events and activities.

One of the key features of the LR-100 is its lightweight and ergonomic design, making it comfortable for users to wear for extended periods. The device is equipped with a built-in speaker and headphone jack, enabling users to connect their preferred headphones for a more personalized audio experience. This flexibility caters to users with varying preferences, ensuring that everyone can receive the audio quality they desire.

The LR-100 utilizes cutting-edge FM technology, which provides excellent audio clarity and minimizes interference, even in crowded environments. This feature is particularly vital in settings where multiple audio signals may be present, guaranteeing that users receive a clear and focused audio feed. The LR-100 has a wide operating frequency range, ensuring compatibility with various transmitters and audio sources.

The device operates on a robust battery system that delivers extended life for users in need of longer listening sessions. The LR-100 can easily be recharged via a USB port, offering convenience and reducing the need for disposable batteries. This eco-friendly option aligns with sustainability efforts while providing reliable performance for prolonged use.

A standout characteristic of the LR-100 is its adjustable volume control, allowing users to set their preferred listening level. Furthermore, the device comes with a variety of accessories, including adjustable neck loops and earphones, to accommodate different listening preferences and needs.

The LR-100 is also designed with durability in mind, featuring a rugged casing that can withstand the rigors of daily use. This resilience is particularly important for environments where devices may be handled frequently, ensuring longevity and sustained performance over time.

In conclusion, the Listen Technologies LR-100 is an exceptional personal listening device that combines convenience, performance, and adaptability. Its state-of-the-art features and technologies make it an indispensable tool for enhancing audio experiences in a range of environments, allowing users to engage more fully and enjoy every moment.