Bravetti FP200 owner manual Operating Instructions

Page 3

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS cont.

The Bravetti Platinum Pro DO IT ALL 3 STICK BLENDER/CHOPPER is an indispensable kitchen tool for blending, chopping, mixing or pureeing when preparing your favorite recipes. The interchangeable accessories and attachments that come with your unit are powered by a high efficiency 350 watt power pack. For best results, be sure to carefully read all the instructions contained in this book before using this appliance.

Variable Speed Control:

Your Bravetti Platinum Pro Do It All 3 Stick Blender/ Chopper has been designed with a variable speed control to provide more versatility in preparing delicate sauces or for chopping ice. To adjust speed, turn knob on top of Power Pack clockwise from low setting to

4.

Place the metal stick blender first into the

 

food to be chopped or pureed before

 

pressing the On/Off Switch to avoid

 

spattering.

5.

Use the variable speed control knob to

 

select the desired speed.

6.

Always release the On/Off switch before

350 Watt Power Pack

The 350 Watt Power Pack operates on 120V~, 60Hz. electrical power. Never allow the power pack to become wet when plugged into an electrical outlet.

Warning: The power pack should never be immersed in water.

Caution: Make sure that the power pack is unplugged from power source before attaching or removing any accessory.

To use the power pack with any of the Bravetti Platinum Pro Do It All Stick Blender/Chopper accessories, place it on the attachment shaft aligning the arrows on the power pack and accessories to be used and turn it counterclockwise 90º until the arrow on the power pack aligns with the square. To remove the power pack, turn it clockwise.

To operate the Power Pack, press on the switch button located on the top of the unit. The Power Pack will stop operating when you remove your finger from the switch button.

Variable Speed Control

There is a variable speed control located at the top of the power pack. To vary the speed of your Do It All Stick Blender/Chopper rotate the round knob at the top of the power pack. From the low setting turn the variable speed control clockwise to increase speed and counterclockwise to reduce speed.

Stick Blender Attachment

Caution - Blade is sharp. Detach Stick Blender from power pack and wash with warm soapy water. Do not use any sharp pointed objects to clean residues from under the blade.

Food Chopper Attachment

Caution - Blades are sharp. Use extreme caution when handling the blade, always hold it by the plastic hub. Do not immerse the cover and gear

box in water.

To store the unit, do not wrap cord around the power pack. Coil cord loosely and use a twist tie to secure it in large loops.

To clean the power pack, processor cover/gear box, wipe off with a clean, damp kitchen cloth. Towel dry.

Wall Bracket

A wall bracket is provided with your Bravetti Platinum Pro Do It All 3 Stick

Blender/ Chopper. Install the wall

bracket in any convenient location using the wall anchors and screws (included). The Power Pack with or without the Stick Blender attachment may then be conveniently stored out of the way. (See illustration below.)

Important: Install wall mount bracket high enough above countertop to allow for clearance of power pack with stick blender attached.

Care and Cleanup

Always disconnect unit from power source before cleaning or changing accessories.

Caution: Never immerse the power pack, cord, or plug in water.

increase speed and counterclockwise from high setting to decrease speed.

Assembling the Stick Blender:

Make sure that the unit is unplugged from power source before attaching or removing any of the Stick Blender attachments.

1.Line up arrow of Stick Blender attachment with arrow on power pack. Once fully inserted, rotate stick blender attachment clockwise 90º until arrow on power pack aligns with square on Stick Blender.

Warning: This appliance is designed for intermittent use. Maximum running time with the Stick Blender is 1 minute. After this time, allow the unit to cool.

2.Plug the cord into an electrical outlet.

Caution: To avoid splattering, place the Stick Blender first in the food to be beaten or chopped, then press the button. Always release the button before removing the Stick Blender from the food, especially when using the Stick Blender in hot liquids. Always hold the Stick Blender with your hand while processing. Never leave unit unattended.

Caution: Do not use the Stick Blender on the stove. If you want to use it in a saucepan while cooking, you must first remove saucepan from the stove.

3.Use the glass beaker with the Stick Blender or you can use another container. The glass beaker is intended only for processing small quantities of food with the Stick Blender.

removing the stick blender from the food

especially when using the stick blender in

hot liquids. Always hold the unit with your

hand while processing. Never leave the

unit unattended or hook it on the wall

bracket when it is plugged in.

7. To remove the stick blender attachment

from the power pack, first unplug the unit

from the power source and turn only the

stick blender attachment 90°

counterclockwise and pull it off.

Using the Stick Blender

Pureeing soups, sauces, fruits and vegetables:

*Fruits and vegetables should be peeled, cored and seeded.

*Meats, poultry, and fish should have skin and bones removed.

*Food should be cut up into pieces no larger than 3/4-inch.

*Cook the food in liquid until very soft and tender.

*Puree cooked food ONLY after allowing to cool down.

*Food can also be pureed directly in the pot after being allowed to cool.

*Place the Stick Blender in the center of the food in an upright position with the processor end resting directly on the bottom of the bowl or pot.

*The processor end must always be immersed in the food. DO NOT lift up and out of food while operating since the hot food will splatter and could cause burns.

*While holding the power pack and the Stick Blender in your hand, press and hold down on the switch with your index finger.

*Release once the food has reached the desired consistency.

*Do not operate continuously for more than 1 minute.

*If pieces of unprocessed food remain, or if there are any lumps, continue pureeing the food, however, mash the food pieces or lumps by slightly raising and then lowering the Stick Blender over those pieces.

3

4

Image 3
Contents EURO-PRO Operating LLC Boston, MA Getting to Know Your do IT ALL Stick BLENDER/CHOPPER Important Safety InstructionsOperating Instructions Food Chopper Assembly Using the Food ChopperCrushing Ice Storing Your Unit Multi-Mixer AssemblyCare & Maintenance Attaching the Attachments to the Mixer Gear BoxModel FP200 ONE 1 Year LIM Ited W Arranty

FP200 specifications

The Bravetti FP200 is an innovative food processor that brings versatility and convenience to your kitchen. Its design focuses on maximizing efficiency while minimizing the time spent on meal preparation. Boasting a sleek, modern aesthetic, it is not only a functional appliance but also an attractive addition to any countertop.

One of the standout features of the Bravetti FP200 is its powerful motor, which enhances its capability to handle a variety of tasks. With multiple speed settings, users can easily adjust the processing power according to their needs, whether they're chopping vegetables, kneading dough, or blending sauces. This flexibility makes it a valuable tool for both novice cooks and experienced chefs alike.

Equipped with a large capacity bowl, the FP200 can accommodate substantial quantities of food, making it ideal for meal prepping or entertaining guests. The bowl is constructed from high-quality materials, ensuring durability and longevity while resisting stains and odors. Additionally, its wide feed chute allows for the seamless addition of ingredients without the need for pre-chopping, saving time and effort during the cooking process.

Safety is a key consideration in the design of the Bravetti FP200. It features a locking mechanism that ensures the lid is securely in place during operation, preventing any accidental spills or mishaps. Non-slip feet further enhance stability, allowing users to process food with confidence.

The FP200 also emphasizes ease of cleaning, with dishwasher-safe parts that simplify post-cooking maintenance. This feature is especially appreciated by busy individuals who want to enjoy their culinary creations without dreading the cleanup afterward.

Moreover, the Bravetti FP200 comes with a variety of attachments and accessories, including different blades for slicing, shredding, and chopping, thus allowing for a wide range of culinary tasks. The ability to customize its functionality with different tools enhances its utility and efficiency in the kitchen.

In conclusion, the Bravetti FP200 food processor encapsulates a blend of power, versatility, and user-friendly design. Its range of capabilities makes it an essential kitchen appliance for anyone looking to simplify their cooking experience while still achieving delicious results. With its commitment to quality and performance, the FP200 stands out as a reliable companion for all your food preparation needs.