Food Chopper Assembly, Using the Food Chopper

OPERATING INSTRUCTIONS cont.

Food Chopper Assembly

Caution - Blades are sharp. Use extreme caution when handling the blade, always hold it by the plastic hub. Do not immerse the gear box in water.

1.Place blade support in the groove inside the glass beaker.

2.Insert the chopper blade onto the blade support.

3.Place the food to be chopped into the glass beaker.

4.Cover the glass beaker with the chopper gear box adapter.

5.Place the chopper gear box on top of the glass beaker.

6.Attach the power pack to the chopper gear box by rotating 90° counterclockwise and lining up the arrows.

7.If you wish to use the Frothier attachment to whip cream or milk, insert onto chopper blade as shown in illustration at right. The frothier attachment is NOT to be used for chopping.

Power Pack

Chopper Gear

Box

Chopper Gear

Box Adapter

Frothier

(not for chopping)

Chopper Blade

Blade Support

Using the Food Chopper

*Only process very soft, tender pieces of food.

*Food pieces should not be larger than ¾-inch cubes.

*Do not fill the processor bowls more than half way with very soft, tender foods like cooked apples or tomatoes. When pureeing foods like cooked vegetables, soft cheese, or cooked poultry, only add a few pieces at a time so that the unit does not jam. It is best to batch feed when using this appliance.

*Avoid pureeing foods like citrus fruits or other foods that have a lot of fiber or hard, tough skin which can jam the appliance.

*Should the unit jam during use and the blade stops turning, cease operation and unplug the unit from the power source. Disassemble the unit to remove any food that is jammed.

Caution: Never put your fingers or any utensils in the Stick Blender/Chopper during operation.

Warning: This appliance is designed

for intermittent use. Maximum running time with the Chopper is 15 seconds. Allow unit to cool before resuming use. Best chopping results are achieved by using 2-3 second pulses.

Important: To mince meat, cut the meat into 1/2” cubes and do not mince more than 6 oz. at one time. Make sure that the meat, fish or poultry is fully defrosted and that all bones and gristle have been removed. Allow cooked food to cool before placing in the chopping bowl.

1. After assembling the unit, hold the

Press on the switch for 2 to 3 seconds and then let go. Repeat this procedure until the food has reached the desired consistency.

3.Disconnect the unit from the power source. After the blade has fully stopped, remove the chopper gear box and the chopper gear box adapter. Using a rubber spatula, remove the chopped or minced food from the glass beaker.

Caution: Never put your fingers or any utensils in the Stick Blender/Chopper during operation.

Crushing Ice

Caution - Blades are sharp. Use extreme caution when handling the blade, always hold it by the plastic hub. Do NOT immerse Power Pack in

water or any other liquid.

Ensure that the chopper gear box, chopper gear box adapter and blade assembly is well seated before turning the unit on to chop ice. Hold appliance with BOTH hands when chopping ice.

1.Assemble the chopper as you would for chopping (see page 5 for assembly instructions).

2.Place ice cubes to be crushed into bowl.

3.Hold the power pack firmly with one hand and pulse the On/Off switch with your index finger as you hold the glass beaker firmly with the other

when you are crushing ice cubes. Note: Recommended size of ice cubes is

1 1/4” x 1” x 3/4”. Do not crush more than 6 oz. of ice cubes at a time.

Warning:This appliance is intended for

intermittent use. When crushing ice, use only bursts of 4 seconds each. Run time not to exceed 15 seconds before allowing unit to cool down.

Glass Beaker

power pack with your hand, press and

hold down on the On/Off switch with

your index finger.

2. To avoid the food from being over

processed, use the pulse method of

chopping and mincing.

Caution: Hold both the bowl/gear box and power pack when chopping ice. Don’t hold appliance by the power pack only.

FP200 specifications

The Bravetti FP200 is an innovative food processor that brings versatility and convenience to your kitchen. Its design focuses on maximizing efficiency while minimizing the time spent on meal preparation. Boasting a sleek, modern aesthetic, it is not only a functional appliance but also an attractive addition to any countertop.

One of the standout features of the Bravetti FP200 is its powerful motor, which enhances its capability to handle a variety of tasks. With multiple speed settings, users can easily adjust the processing power according to their needs, whether they're chopping vegetables, kneading dough, or blending sauces. This flexibility makes it a valuable tool for both novice cooks and experienced chefs alike.

Equipped with a large capacity bowl, the FP200 can accommodate substantial quantities of food, making it ideal for meal prepping or entertaining guests. The bowl is constructed from high-quality materials, ensuring durability and longevity while resisting stains and odors. Additionally, its wide feed chute allows for the seamless addition of ingredients without the need for pre-chopping, saving time and effort during the cooking process.

Safety is a key consideration in the design of the Bravetti FP200. It features a locking mechanism that ensures the lid is securely in place during operation, preventing any accidental spills or mishaps. Non-slip feet further enhance stability, allowing users to process food with confidence.

The FP200 also emphasizes ease of cleaning, with dishwasher-safe parts that simplify post-cooking maintenance. This feature is especially appreciated by busy individuals who want to enjoy their culinary creations without dreading the cleanup afterward.

Moreover, the Bravetti FP200 comes with a variety of attachments and accessories, including different blades for slicing, shredding, and chopping, thus allowing for a wide range of culinary tasks. The ability to customize its functionality with different tools enhances its utility and efficiency in the kitchen.

In conclusion, the Bravetti FP200 food processor encapsulates a blend of power, versatility, and user-friendly design. Its range of capabilities makes it an essential kitchen appliance for anyone looking to simplify their cooking experience while still achieving delicious results. With its commitment to quality and performance, the FP200 stands out as a reliable companion for all your food preparation needs.